diff --git a/Scripts/Home Lab/Home Lab Delete settings.ps1 b/Scripts/Home Lab/Home Lab Delete settings.ps1
new file mode 100644
index 0000000..1846756
--- /dev/null
+++ b/Scripts/Home Lab/Home Lab Delete settings.ps1	
@@ -0,0 +1,28 @@
+$ESXIP = "192.168.1.201"
+$ESXUser = "root"
+$ESXPWD = "VMware1!"
+
+Connect-viserver $esxip -user $ESXUser -pass $ESXPWD
+
+#Leaving confirm off just in case someone happens to be connected to more than one vCenter/Host!
+Get-VM | Stop-VM
+Get-VM | Remove-VM
+
+$ESXCLI = Get-EsxCli -v2 -VMHost (get-VMHost)
+$esxcli.vsan.cluster.leave.invoke()
+
+$VSANDisks = $esxcli.storage.core.device.list.invoke() | Where {$_.isremovable -eq "false"} | Sort size
+$Performance = $VSANDisks[0]
+$Capacity = $VSANDisks[1]
+
+$removal = $esxcli.vsan.storage.remove.CreateArgs()
+$removal.ssd = $performance.Device
+$esxcli.vsan.storage.remove.Invoke($removal)
+
+$capacitytag = $esxcli.vsan.storage.tag.remove.CreateArgs()
+$capacitytag.disk = $Capacity.Device
+$capacitytag.tag = "capacityFlash"
+$esxcli.vsan.storage.tag.remove.Invoke($capacitytag)
+
+Set-VMHostSysLogServer $null
+Remove-VMHostNtpServer (Get-VMHostNtpServer) -Confirm:$false
\ No newline at end of file
diff --git a/Scripts/Home Lab/Home Lab Deployment.ps1 b/Scripts/Home Lab/Home Lab Deployment.ps1
new file mode 100644
index 0000000..b119966
--- /dev/null
+++ b/Scripts/Home Lab/Home Lab Deployment.ps1	
@@ -0,0 +1,216 @@
+# ESX Start Host deployment Settings
+$ESXIP = "192.168.1.201"
+$ESXUser = "root"
+$ESXPWD = "VMware1!"
+
+# VCSA Configuration
+$VCSACDDrive = "D:\"
+$SSODomainName = "corp.local"
+$VCNAME = "VC01"
+$VCUser = "Administrator@$SSODomainName"
+$VCPass = "VMware1!"
+$VCIP = "192.168.1.200"
+$VCDNS = "192.168.1.1"
+$VCGW = "192.168.1.1"
+$VCNetPrefix = "24"
+$VCSADeploymentSize = "tiny"
+
+# vCenter Configuration
+$SSOSiteName = "Site01"
+$datacenter = "DC01"
+$cluster = "Cluster01"
+$ntpserver = "pool.ntp.org"
+$webClientTheme = "CormacHogan"
+
+# VSAN Configuration
+$VSANPolicy = '(("hostFailuresToTolerate" i1) ("forceProvisioning" i1))'
+$VMKNetforVSAN = "Management Network"
+
+# General Settings
+$verboseLogFile = "$ENV:Temp\vsphere65-NUC-lab-deployment.log"
+
+# End of configuration
+Function My-Logger {
+    param(
+    [Parameter(Mandatory=$true)]
+    [String]$message
+    )
+
+    $timeStamp = Get-Date -Format "MM-dd-yyyy_hh:mm:ss"
+
+    Write-Host -NoNewline -ForegroundColor White "[$timestamp]"
+    Write-Host -ForegroundColor Green " $message"
+    $logMessage = "[$timeStamp] $message"
+    $logMessage | Out-File -Append -LiteralPath $verboseLogFile
+}
+
+$StartTime = Get-Date
+
+Write-Host "Writing Log files to $verboselogfile" -ForegroundColor Yellow
+Write-Host ""
+
+If (-not (Test-Path "$($VCSACDDrive)vcsa-cli-installer\win32\vcsa-deploy.exe")){
+    Write-Host "VCSA media not found at $($VCSACDDrive) please mount it and try again"
+    return
+}
+My-Logger "Connecting to ESXi Host: $ESXIP ..."
+$connection = Connect-viserver $ESXIP -user $ESXUser -Password $ESXPWD -WarningAction SilentlyContinue
+
+My-Logger "Enabling SSH Service for future troubleshooting ..."
+Start-VMHostService -HostService (Get-VMHost | Get-VMHostService | Where { $_.Key -eq "TSM-SSH"} ) | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Configuring NTP server to $ntpserver and retarting service ..."
+Get-VMHost | Add-VMHostNtpServer $ntpserver | Out-File -Append -LiteralPath $verboseLogFile
+Get-VMHost | Get-VMHostFirewallException | where {$_.Name -eq "NTP client"} | Set-VMHostFirewallException -Enabled:$true | Out-File -Append -LiteralPath $verboseLogFile
+Get-VMHost | Get-VmHostService | Where-Object {$_.key -eq "ntpd"} | Start-VMHostService | Out-File -Append -LiteralPath $verboseLogFile
+Get-VMhost | Get-VmHostService | Where-Object {$_.key -eq "ntpd"} | Set-VMHostService -policy "automatic" | Out-File -Append -LiteralPath $verboseLogFile
+
+#Configure VSAN Bootstrap (http://www.virtuallyghetto.com/2013/09/how-to-bootstrap-vcenter-server-onto_9.html)
+My-Logger "Setting the VSAN Policy for ForceProvisiong ..."
+$esxcli = get-esxcli -V2
+$VSANPolicyDefaults = $esxcli.vsan.policy.setdefault.CreateArgs()
+$VSANPolicyDefaults.policy = $VSANPolicy
+$VSANPolicyDefaults.policyclass = "vdisk"
+$esxcli.vsan.policy.setdefault.Invoke($VSANPolicyDefaults) | Out-File -Append -LiteralPath $verboseLogFile
+$VSANPolicyDefaults.policyclass = "vmnamespace"
+$esxcli.vsan.policy.setdefault.Invoke($VSANPolicyDefaults) | Out-File -Append -LiteralPath $verboseLogFile
+
+# Create new VSAN Cluster
+My-Logger "Creating a new VSAN Cluster ..."
+$esxcli.vsan.cluster.new.Invoke() | Out-File -Append -LiteralPath $verboseLogFile
+$VSANDisks = $esxcli.storage.core.device.list.invoke() | Where {$_.isremovable -eq "false"} | Sort size
+"Found the following disks to use for VSAN:" | Out-File -Append -LiteralPath $verboseLogFile
+$VSANDisks | FT | Out-File -Append -LiteralPath $verboseLogFile
+$Performance = $VSANDisks[0]
+"Using $($Performance.Model) for Performance disk" | Out-File -Append -LiteralPath $verboseLogFile
+$Capacity = $VSANDisks[1]
+"Using $($Capacity.Model) for Capacity disk" | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Tagging $($Capacity.Model) as Capacity ..."
+$capacitytag = $esxcli.vsan.storage.tag.add.CreateArgs()
+$capacitytag.disk = $Capacity.Device
+$capacitytag.tag = "capacityFlash"
+$esxcli.vsan.storage.tag.add.Invoke($capacitytag) | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Create VSAN Diskgroup to back VSAN Cluster ..."
+$addvsanstorage = $esxcli.vsan.storage.add.CreateArgs()
+$addvsanstorage.ssd = $Performance.Device
+$addvsanstorage.disks = $Capacity.device
+$esxcli.vsan.storage.add.Invoke($addvsanstorage) | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Deploying VCSA using Script CLI + JSON ..."
+$config = (get-content –raw “$($VCSACDDrive)vcsa-cli-installer\templates\install\embedded_vCSA_on_ESXi.json” ) | convertfrom-json
+$config.'new.vcsa'.esxi.hostname = $ESXIP
+$config.'new.vcsa'.esxi.username = $ESXUser
+$config.'new.vcsa'.esxi.password = $ESXPWD
+$config.'new.vcsa'.esxi.datastore = "vsanDatastore"
+$config.'new.vcsa'.network.ip = $VCIP
+$config.'new.vcsa'.network.'dns.servers'[0] = $VCDNS
+$config.'new.vcsa'.network.gateway = $VCGW
+$config.'new.vcsa'.network.'system.name' = $VCIP #Change to $VCName if you have DNS setup
+$config.'new.vcsa'.network.prefix = $VCNetPrefix
+$config.'new.vcsa'.os.password = $VCPass
+$config.'new.vcsa'.appliance.'deployment.option' = $VCSADeploymentSize
+$config.'new.vcsa'.sso.password = $VCPass
+$config.'new.vcsa'.sso.'site-name' = $SSOSiteName
+$config.'new.vcsa'.sso.'domain-name' = $SSODomainName
+$config | convertto-json | set-content –path “$($ENV:Temp)\jsontemplate.json”
+invoke-expression “$($VCSACDDrive)vcsa-cli-installer\win32\vcsa-deploy.exe install --no-esx-ssl-verify --accept-eula --acknowledge-ceip $($ENV:Temp)\jsontemplate.json” | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Enable VSAN Traffic on VMKernel Network ..."
+$VMKernel = Get-VMHost $ESXIP | Get-VMHostNetworkAdapter -VMKernel | Where {$_.PortGroupName -eq $VMKNetforVSAN }
+$IsVSANEnabled = $VMKernel | Where { $_.VsanTrafficEnabled}
+If (-not $IsVSANEnabled) {
+    My-Logger "Enabling VSAN Kernel on $VMKernel ..."
+    $VMKernel | Set-VMHostNetworkAdapter -VsanTrafficEnabled $true -Confirm:$false | Out-File -Append -LiteralPath $verboseLogFile
+} Else {
+    My-Logger "VSAN Kernel already enabled on $VmKernel ..."
+}
+
+My-Logger "Disconnecting from ESXi Host: $ESXIP ..."
+Disconnect-VIServer $ESXIP -Force -Confirm:$false -WarningAction SilentlyContinue
+
+My-Logger "Connecting to vCenter: $VCIP ..."
+$connection = Connect-VIServer -Server $VCIP -User $VCUser -Password $vcpass -WarningAction SilentlyContinue
+
+My-Logger "Creating Datacenter: $datacenter ..."
+New-Datacenter -Name $datacenter -Location (Get-Folder -Type Datacenter) | Out-File -Append -LiteralPath $verboseLogFile
+My-Logger "Creating Cluster: $cluster ..."
+New-Cluster -Name $cluster -Location (Get-Datacenter -Name $datacenter) -DrsEnabled -VsanEnabled | Out-File -Append -LiteralPath $verboseLogFile
+My-Logger "Adding ESXi Host $ESXIP to vCenter ..."
+Add-VMHost -Location (Get-Cluster -Name $cluster) -User $ESXUser -Password $ESXPWD -Name $ESXIP -Force | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Setting the VCSA NTP server to: $NTPServer ..."
+Connect-CISServer -Server $VCIP -User $VCUser -Password $VCPass
+(Get-CISService com.vmware.appliance.techpreview.ntp.server).set(@($NTPServer)) | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Configuring Host syslog to VC ..."
+Get-VMHost | Set-VMHostSysLogServer -SysLogServer $VCIP | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Acknowledging Alarms on the cluster ..."
+$alarmMgr = Get-View AlarmManager 
+Get-Cluster | where {$_.ExtensionData.TriggeredAlarmState} | %{
+    $cluster = $_
+    $Cluster.ExtensionData.TriggeredAlarmState | %{
+        $alarmMgr.AcknowledgeAlarm($_.Alarm,$vm.ExtensionData.MoRef) | Out-File -Append -LiteralPath $verboseLogFile
+    }
+}
+
+My-Logger "Creating @lamw Content Library with Nested ESXi Images ..."
+
+# Get a Datastore to create the content library on
+$datastoreID = (Get-Datastore "vsanDatastore").extensiondata.moref.value
+
+# Get the Service that works with Subscribed content libraries
+$ContentCatalog = Get-CisService com.vmware.content.subscribed_library
+ 
+# Create a Subscribed content library on an existing datastore
+$createSpec = $ContentCatalog.help.create.create_spec.CreateExample()
+$createSpec.subscription_info.authentication_method = "NONE"
+$createSpec.subscription_info.ssl_thumbprint = "69:d9:9e:e9:0b:4b:68:24:09:2b:ce:14:d7:4a:f9:8c:bd:c6:5a:e9"
+$createSpec.subscription_info.automatic_sync_enabled = $true
+$createSpec.subscription_info.subscription_url = "https://s3-us-west-1.amazonaws.com/vghetto-content-library/lib.json"
+$createSpec.subscription_info.on_demand = $false
+$createSpec.subscription_info.password = $null
+$createSpec.server_guid = $null
+$createspec.name = "virtuallyGhetto CL"
+$createSpec.description = "@lamw CL: http://www.virtuallyghetto.com/2015/04/subscribe-to-vghetto-nested-esxi-template-content-library-in-vsphere-6-0.html"
+$createSpec.type = "SUBSCRIBED"
+$createSpec.publish_info = $null
+$datastoreID = [VMware.VimAutomation.Cis.Core.Types.V1.ID]$datastoreID
+$StorageSpec = New-Object PSObject -Property @{
+    datastore_id = $datastoreID
+    type         = "DATASTORE"
+    }
+$CreateSpec.storage_backings.Add($StorageSpec)
+$UniqueID = [guid]::NewGuid().tostring()
+$ContentCatalog.create($UniqueID, $createspec) | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Changing the default VSAN VM Storage Policy to FTT=0 & Force Provisioning to Yes ..."
+$VSANPolicy = Get-SpbmStoragePolicy "Virtual SAN Default Storage Policy"
+$Ruleset = New-SpbmRuleSet -Name “Rule-set 1” -AllOfRules @((New-SpbmRule -Capability VSAN.forceProvisioning $True), (New-SpbmRule -Capability VSAN.hostFailuresToTolerate 0))
+$VSANPolicy | Set-SpbmStoragePolicy -RuleSet $Ruleset | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Enabling VM Autostart for the VCSA VM ..."
+$VCVM = Get-VM
+$vmstartpolicy = Get-VMStartPolicy -VM $VCVM
+Set-VMHostStartPolicy (Get-VMHost $ESXIP | Get-VMHostStartPolicy) -Enabled:$true | Out-File -Append -LiteralPath $verboseLogFile
+Set-VMStartPolicy -StartPolicy $vmstartpolicy -StartAction PowerOn -StartDelay 0 | Out-File -Append -LiteralPath $verboseLogFile
+
+My-Logger "Enabling SSH on VCSA for easier troubleshooting ..."
+$vcsassh = Get-CIsService com.vmware.appliance.access.ssh
+$vcsassh.set($true)
+
+$EndTime = Get-Date
+$duration = [math]::Round((New-TimeSpan -Start $StartTime -End $EndTime).TotalMinutes,2)
+
+My-Logger "================================"
+My-Logger "vSphere Lab Deployment Complete!"
+My-Logger "StartTime: $StartTime"
+My-Logger "  EndTime: $EndTime"
+My-Logger " Duration: $duration minutes"
+Write-Host ""
+My-Logger "Access the vSphere Web Client at https://$VCIP/vsphere-client/"
+My-Logger "Access the HTML5 vSphere Web Client at https://$VCIP/ui/"
+My-Logger "Browse the vSphere REST APIs using the API Explorer here: https://$VCIP/apiexplorer/"
+My-Logger "================================"
\ No newline at end of file