#!/usr/bin/env bash
# MediaManager Scripts

action="$1"

VERBOSE=true

if [ -f /opt/idssys/settings/mediamanager.conf ]; then
	mv /opt/idssys/settings/mediamanager.conf ${MMFOLDER}/settings.conf
fi

source /opt/idssys/defaults/colors.inc
source /opt/idssys/defaults/default.inc
source /opt/idssys/mediamanager/settings.conf
source /opt/idssys/mediamanager/defaults.inc
[ -f ${MMFOLDER}/realwanip ] && source ${MMFOLDER}/realwanip
[ -f ${MMFOLDER}/vers.info ] && source ${MMFOLDER}/vers.info


if [ "${2}" == "q" ]; then
	unset idsCL idsBG idsST
	idsCL=('')
	idsBG=('')
	idsST=('')
fi

[ -f ${MMFOLDER}/vpninfo ] && source ${MMFOLDER}/vpninfo

if [[ "${noheader}" != *" ${1} "* ]] && [[ "${noheader}" != *" ${2} "* ]]; then
	if [ -f ${MMFOLDER}/update.available ]; then
		dispup="${idsCL[Yellow]} - Update Available! (run '${idsCL[LightCyan]}mm update${idsCL[Yellow]}')${idsCL[Default]}"
	else
		dispup=""
	fi
	echo
	echo -e "${idsCL[LightGreen]} MediaManager ${idsCL[Default]}  ${idsCL[DarkGray]}(ver-${VERS})${dispup}${idsCL[Default]}"
	DIVIDER . lightGreen
fi

IFS=,
SERVICES_CHECK=(${SERVICESCHECK})
unset IFS

cw_spc=40

MMCRONCHECK(){
	[ -f ${MMFOLDER}/mm.stop ] && /usr/local/bin/mm check q >/dev/null 2>&1 || /usr/local/bin/mm check q >> /opt/idssys/mediamanager/logs/outputs.check.log
	exit 0
}

MMSTART(){
	[ $VERBOSE = true ] && chktmstart=`date +%s`
	([ "${1}" == "start" ] || [ "${1}" == "check" ]) && touch ${MMFOLDER}/mm.stop.checking
	[ "${2}" == "vpn" ] && touch ${MMFOLDER}/mm.noservices
	if [ "${1}" = "start" ] || [ "${1}" = "restart" ] || [ "${1}" = "" ]; then
		GOFORSTART=true;
		
	elif [ "${1}" == "check" ] && [ "$(/sbin/ip link | grep "${VPN_INTERFACE}")" == "" ] && [ ! -f ${MMFOLDER}/mm.vpn* ] && [ ! -f ${MMFOLDER}/vpninfo.* ]; then
		GOFORSTART=true;
		SENDNOTICE "Starting Media Management Systems" "Fresh Startup"
		echo "$(date) - Starting Media Management system - (fresh start)" >> $logfile
		echo -e "${idsCL[LightCyan]}Fresh Startup${idsCL[Default]}"
	
	elif [ "${1}" = "check" ] && [ "$(/sbin/ip link | grep "${VPN_INTERFACE}")" = "" ] && [ -f ${MMFOLDER}/mm.vpn* ]; then
		GOFORSTART=true;
		echo "$(date) - Attempting to restart systems after VPN failure..." >> $logfile
		echo -e "${idsCL[LightCyan]}Attempting to restart systems after VPN failure...${idsCL[Default]}"
		SENDNOTICE "Attempting to start systems after VPN failure..."
		
	else
		GOFORSTART=false;
		
	fi
	
	if [ ${GOFORSTART} = true ]; then
		mmsv='Starting'
		echo
		OUT=$(/sbin/ip link | grep "${VPN_INTERFACE}")			
		if [ ${#OUT} = 0 ]; then
			
			msg="Setting up the VPN Tunnel config"
			c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
			until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
			echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
			VPNCONFIG
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			
			msg="Starting the VPN Tunnel"
			c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
			until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
			echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
			
			echo "REALWANIP=\"$(/usr/bin/dig +short +time=2 myip.opendns.com @208.67.222.222)\"" > ${MMFOLDER}/realwanip
			source ${MMFOLDER}/realwanip
			
			"${VPN_START[@]}" >/dev/null 2>&1
			sleep 5s
		else
			msg="The VPN Tunnel is already running"
			c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
			until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
			echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
		fi
	else
		msg="Verifying the VPN Tunnel"
		c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
		until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
		echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
		mmsv='Verifying'
	fi
	
	[ $VERBOSE = true ] && echo "$(date) - ${mmsv} VPN..." >> $logfile

	
	OUT=$(/sbin/ip link | grep "$VPN_INTERFACE")			
	if [ ${#OUT} = 0 ]; then
		if [ -f ${MMFOLDER}/mm.vpn.fail ]; then
			echo -e "${idsCL[Red]} failed, restarting system${idsCL[Default]}"
			echo "$(date) - VPN Failure #2 - restarting system" >> $logfile
			SENDNOTICE "VPN Failure" "2nd Failure, will try and restart the VPN" 1
			touch ${MMFOLDER}/mm.vpn.fail2
			rm -f ${MMFOLDER}/mm.vpn.fail
			MMSTOP
			# sleep 2m
			# "${VPN_START[@]}" >/dev/null 2>&1
			# sleep 10s
			rm -f ${MMFOLDER}/mm.stop*
			[ $VERBOSE = true ] && DEBUGLOGSTOP
			exit 1
		elif [ -f ${MMFOLDER}/mm.vpn.fail2 ]; then
			echo "$(date) - VPN Failure #3 - Shutting down Media Management systems" >> $logfile
			SENDNOTICE "VPN Failure" "Final Failure, shutting down system" 2
			MMSTOP
			[ $VERBOSE = true ] && DEBUGLOGSTOP
			exit 1
		else
			echo -e "${idsCL[Red]} failed, restarting system${idsCL[Default]}"
			echo "$(date) - VPN Failure #1 - restarting system" >> $logfile
			SENDNOTICE "VPN Failure" "1st Failure, will try and restart the VPN" 1
			touch ${MMFOLDER}/mm.vpn.fail
			MMSTOP
			# sleep 10s
			# "${VPN_START[@]}" >/dev/null 2>&1
			# sleep 10s
			rm -f ${MMFOLDER}/mm.stop*
			[ $VERBOSE = true ] && DEBUGLOGSTOP
			exit 1
		fi
	fi
	
	[ "${1}" == "start" ] && rm -f mm.vpn.fail*
			
	OUT=$(/sbin/ip link | grep "$VPN_INTERFACE")			
	if [ ${#OUT} != 0 ]; then
		if [ ${GOFORSTART} = true ] || [ "${1}" == "check" ]; then
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
		fi
		
		vpnuptime=$(expr `date +%s` - $(stat -c %Y ${MMFOLDER}/vpninfo))
		if [ ${vpnuptime} -ge 86400 ]; then
			echo "$(date) - 24hr session limit reached, restarting vpn & services" >> $logfile
			echo -en "${idsCL[LightCyan]}24hr session limit reached, restarting vpn & services ."
			[ -f ${MMFOLDER}/mm.noservices ] && rv="vpn" || rv=""
			MMSTOP >/dev/null 2>&1
			echo -en "."
			read -et 10
			echo -en "."
			read -et 10
			echo -en "."
			read -et 10
			echo -en "."
			MMSTART start ${rv} >/dev/null 2>&1
			echo -e " ${idsCL[Green]}Done${idsCL[Default]}"
			exit 0
		fi
		
		zerogw=$(/sbin/ip route show | grep 0.0.0.0 | cut -d' ' -f 3)
		defaultgw=$(/sbin/ip route show | grep default | cut -d' ' -f 3)

		# if [ "${zerogw}" != "${defaultgw}" ]; then
		# if [ "${defaultgw}" != "${VPN_INTERFACE}" ]; then
		if [ "${zerogw}" != "${defaultgw}" ] || [ "${defaultgw}" != "${VPN_INTERFACE}" ]; then
			echo "$(date) - Adding VPN default routes" >> $logfile
			
			msg="Adding VPN default routes"
			c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
			until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
			echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
			
			/bin/ip route del default
			/bin/ip route add default dev ${VPN_INTERFACE}
			/bin/ip route add 0.0.0.0/1 dev ${VPN_INTERFACE}
			/bin/ip route add 128.0.0.0/1 dev ${VPN_INTERFACE}
			/bin/ip route add ${vpn_server_address}/32 via 10.10.0.1 dev eth0
			
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			
			zerogw=$(/sbin/ip route show | grep 0.0.0.0 | cut -d' ' -f 3)
			defaultgw=$(/sbin/ip route show | grep default | cut -d' ' -f 3)
		fi
		
		msg="Verifying default network routes"
		c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
		until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
		echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
		
		checked=false
		cc=0
		until [ "${checked}" = "" ]; do
			if [ "${zerogw}" = "${defaultgw}" ]; then
				checked=""
			fi
			if [ "${checked}" == "false" ] && [ ${cc} -eq 10 ]; then
				echo -e "${idsCL[Red]}Could not confirm default routes, restarting system!${idsCL[Default]}"
				echo "$(date) - Could not confirm default routes, restarting system" >> $logfile
				SENDNOTICE "Network Failure" "Default route failure, will try and restart the VPN" 1
				touch ${MMFOLDER}/mm.vpn.fail
				MMSTOP
				sleep 10s
				# "${VPN_START[@]}" >/dev/null 2>&1
				# sleep 10s
				rm -f ${MMFOLDER}/mm.stop*
				[ $VERBOSE = true ] && DEBUGLOGSTOP
				exit 1
			fi
			((cc=${cc}+1))
			sleep 1s
			zerogw=$(/sbin/ip route show | grep 0.0.0.0 | cut -d' ' -f 3)
			defaultgw=$(/sbin/ip route show | grep default | cut -d' ' -f 3)
		done
		echo -e "${idsCL[Green]}Done${idsCL[Default]}"
		
		msg="Verifying traffic routing through VPN"
		c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
		until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
		echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
				
		mmip=""
		cc=0
		until [ "${REALWANIP}" != "" ] && [ "${mmip}" != "" ] && [[ "${REALWANIP}" != *"connection timed out"* ]] && [[ "${mmip}" != *"connection timed out"* ]]; do
			# mmip=$(/usr/bin/dig +short myip.opendns.com @resolver1.opendns.com)
			mmip=$(/usr/bin/dig +short +time=2 myip.opendns.com @208.67.222.222)
			if [ ${cc} -eq 10 ]; then
				echo 
				echo -e "${idsCL[Red]}Cannot get an WAN address, restarting system!${idsCL[Default]}"
				echo "$(date) - Cannot get an WAN address, restarting system! wanip(${REALWANIP}) vpnip(${mmip})" >> $logfile
				[ $VERBOSE = true ] && echo "$(date) - Default Routes: zerogw(${zerogw}) defaultgw(${defaultgw})" >> $logfile
				SENDNOTICE "Network Failure" "Cannot get an WAN address, will try and restart the VPN" 1
				touch ${MMFOLDER}/mm.vpn.fail
				MMSTOP >/dev/null 2>&1
				sleep 10s
				# "${VPN_START[@]}" >/dev/null 2>&1
				# sleep 10s
				rm -f ${MMFOLDER}/mm.stop*
				[ $VERBOSE = true ] && DEBUGLOGSTOP
				exit 1
			fi
			((cc=${cc}+1))
			sleep 1s
		done
		if [ "${REALWANIP}" != "${mmip}" ]; then
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			[ $VERBOSE = true ] && echo "$(date) - WAN Address: ${mmip}  -  GW Address: ${defaultgw}" >> $logfile
		else
			echo 
			echo -e "${idsCL[Red]}Traffic is not routing through VPN, restarting system!${idsCL[Default]}"
			echo "$(date) - Traffic is not routing through VPN, restarting system! wanip(${REALWANIP}) vpnip(${mmip})" >> $logfile
			[ $VERBOSE = true ] && echo "$(date) - Default Routes: zerogw(${zerogw}) defaultgw(${defaultgw})" >> $logfile
			SENDNOTICE "Network Failure" "Traffic route failure, will try and restart the VPN" 1
			touch ${MMFOLDER}/mm.vpn.fail
			MMSTOP
			sleep 10s
			# "${VPN_START[@]}" >/dev/null 2>&1
			# sleep 10s
			rm -f ${MMFOLDER}/mm.stop*
			[ $VERBOSE = true ] && DEBUGLOGSTOP
			exit 1
		fi
		
		msg="Verifying Plex Media is Mounted"
		c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
		until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
		echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
		
		### CHECK FOR PLEX MOUNT
		if [ ! -f ${PLEX_MOUNT}/mounted ] && [ "${2}" != "vpn" ] && [ ! -f ${MMFOLDER}/mm.noservices ]; then
			echo "$(date) - Plex Media Not Mounted, will try and mount" >> $logfile
			umount ${PLEX_MOUNT} >/dev/null 2>&1
			sleep 2s
			mount -a >/dev/null 2>&1
			sleep 2s
			
			if [ ! -f ${PLEX_MOUNT}/mounted ]; then
				if [ -f "${MMFOLDER}/mm.plexmount.fail2" ]; then
					fd=$(( `date +%s` - `stat -L --format %Y "${MMFOLDER}/mm.plexmount.fail2"` ))
					[ ${fd} -gt 100 ] && PMFS=true || PMFS=false
				elif [ -f ${MMFOLDER}/mm.plexmount.fail ]; then
					fd=$(( `date +%s` - `stat -L --format %Y ${MMFOLDER}/mm.plexmount.fail` ))
					[ ${fd} -gt 100 ] && PMFS=true || PMFS=false
				else
					PMFS=true
				fi
				
				if [ ${PMFS} = true ]; then
					[ -f "${MMFOLDER}/mm.plexmount.fail2" ] && touch ${MMFOLDER}/mm.plexmount.fail2 || touch ${MMFOLDER}/mm.plexmount.fail
					SENDNOTICE "Plex Media Not Mounted" "Could not mount the Plex Media Folder" 1
					echo "$(date) - Plex Media could not be mounted" >> $logfile
				fi
				if [ ! -f ${MMFOLDER}/mm.plexmount.fail2 ]; then
					echo -e "${idsCL[Red]}Not Mounted${idsCL[Default]}"
					for srvc in "${SERVICES_CHECK[@]}"; do
						/bin/systemctl stop ${srvc} >/dev/null 2>&1 &
					done
				else
					echo -e "${idsCL[Red]}Not Mounted${idsCL[LightCyan]}, running services as chosen previously though${idsCL[Default]}"
				fi
				
			else
				echo -e "${idsCL[Green]}Mounted, fixed${idsCL[Default]}"
				SENDNOTICE "Plex Media Mounted" "The Plex Media Folder was successfully re-mounted again!"
				echo "$(date) - Plex Media now mounted, restarting services" >> $logfile
				for srvc in "${SERVICES_CHECK[@]}"; do
					/bin/systemctl restart ${srvc} >/dev/null 2>&1 &
				done
				rm -f ${MMFOLDER}/mm.plexmount.fail*
			fi
		elif [ "${2}" == "vpn" ] || [ -f ${MMFOLDER}/mm.noservices ]; then
			echo -e "${idsCL[LightCyan]}Skipping, started wtih VPN only${idsCL[Default]}"
		else
			echo -e "${idsCL[Green]}Mounted${idsCL[Default]}"
			if [ -f ${MMFOLDER}/mm.plexmount.fail ]; then
				echo -e "${idsCL[Green]}Mounted, fixed${idsCL[Default]}"
				SENDNOTICE "Plex Media Mounted" "The Plex Media Folder was successfully re-mounted again!"
				echo "$(date) - Plex Media now mounted, restarting services" >> $logfile
				for srvc in "${SERVICES_CHECK[@]}"; do
					/bin/systemctl restart ${srvc} >/dev/null 2>&1 &
				done
				rm -f ${MMFOLDER}/mm.plexmount.fail*
			fi
		fi
		
		if [ -f ${MMFOLDER}/mm.plexmount.fail ] && [ "${1}" == "start" ] && [ "${2}" != "vpn" ]; then
			echo -en "${idsCL[LightCyan]}Would you like to start services without Plex Media being mounted? ${idsCL[LightYellow]}(y/N)${idsCL[LightCyan]}? ${idsCL[Default]}"
			read -n 1 choice
			case "$choice" in 
			[Yy])
				rm -f ${MMFOLDER}/mm.plexmount.fail*
				touch ${MMFOLDER}/mm.plexmount.fail2
				echo;echo
				;;
			* )
				echo;echo
				;;
				
			esac
		fi
		
		[ "${1}" == "start" ] && [ "${2}" != "vpn" ] && rm -f ${MMFOLDER}/mm.noservices
		
		msg="${mmsv} Services"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
		echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
		
		if [ "${2}" != "vpn" ] && [ ! -f ${MMFOLDER}/mm.noservices ] && [ ! -f ${MMFOLDER}/mm.plexmount.fail ]; then
			for srvc in "${SERVICES_CHECK[@]}"; do
				[ "$(systemctl is-active ${srvc})" != "active" ] && /bin/systemctl restart ${srvc}
			done
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			
			msg="Waiting for Services to Start"
			c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
			until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
			echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
			for srvc in "${SERVICES_CHECK[@]}"; do
				if [ "${MM_SERVICE_PORTS[${srvc}]}" != "" ]; then
					checkport=$(lsof -Pi :${MM_SERVICE_PORTS[${srvc}]} -sTCP:LISTEN -t)
					tryupdate=false
					cc=0
					until [ "${checkport}" != "" ]; do
						if [ ${cc} -eq 10 ]; then
							if [ -f ${MMFOLDER}/mm.${srvc}.starting ]; then
								msg="${srvc^} Service is not starting properly, will try and update"
								echo -e "${idsCL[Red]}${msg}${idsCL[Default]}"
								echo "$(date) - ${msg}" >> $logfile
								SENDNOTICE "${srvc^} Service Issue" "${msg}" 1
								
								tryupdate="true"
						
								msg="Updating ${srvc^} Service"
								c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
								until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
								echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
								
								rm -f ${MMFOLDER}/mm.${srvc}.starting
								
							else
								[ "${MM_UPDATE_REPO[$srvc]}" != "" ] && touch ${MMFOLDER}/mm.${srvc}.starting
							fi
							checkport="go"
							
						fi
						if [ "${checkport}" != "go" ]; then
							checkport=$(lsof -Pi :${MM_SERVICE_PORTS[${srvc}]} -sTCP:LISTEN -t)
							((cc=${cc}+1))
							sleep 1s
						fi

					done
				
					if ([ "${checkport}" == "" ] || [ "${tryupdate}" == "true" ]) && [ "${MM_UPDATE_REPO[${srvc}]}" != "" ]; then
						UPDATESERVICE ${srvc} >/dev/null 2>&1
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
						
					elif [ "${tryupdate}" == "true" ]; then
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
					fi
					[ "${checkport}" != "" ] && rm -f ${MMFOLDER}/mm.${srvc}.starting >/dev/null 2>&1
				fi
			done
			
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			
		elif [ -f ${MMFOLDER}/mm.noservices ]; then
			echo -e "${idsCL[LightCyan]}Skipping, started wtih VPN only${idsCL[Default]}"
		elif [ -f ${MMFOLDER}/mm.plexmount.fail ]; then
			echo -e "${idsCL[LightCyan]}Skipping, plex media is not mounted${idsCL[Default]}"
		else
			echo -e "${idsCL[LightYellow]}Skipping${idsCL[Default]}"
		fi
		echo
		
		if [ "${1}" == "start" ] || [ "${1}" == "restart" ]; then
			#echo -e "${idsCL[LightCyan]}It may take a couple of minutes before all services fully start${idsCL[Default]}"
			MMSTATUS
		fi
		if [ -f ${MMFOLDER}/mm.vpn.fail* ]; then
			echo "$(date) - VPN issue has been fixed" >> $logfile
			SENDNOTICE "Services Restored" "VPN issue has been fixed"
			rm -f ${MMFOLDER}/mm.vpn.fail*
		fi
		rm -f ${MMFOLDER}/mm.stop*
		echo -e "${idsCL[Green]}All systems are go!${idsCL[Default]}"
		if [ "${1}" = "start" ] || [ "${1}" = "" ]; then
			echo "$(date) - Media Management systems started" >> $logfile
		fi

	fi
	echo
	
	[ $VERBOSE = true ] && DEBUGLOGSTOP
	
	#exit 0
}

MMSTOP(){
	if [ -f ${MMFOLDER}/mm.stop ]; then
		echo -e "${idsCL[Yellow]}The system is already stopped, will verify anyway...${idsCL[Default]}"
	else
		echo -e "${idsCL[Green]}Stopping System...${idsCL[Default]}"
	fi
	echo
	touch ${MMFOLDER}/mm.stop
	
	# echo -en "${idsCL[LightCyan]}Stopping background MM scripts... ${idsCL[Default]}"
	# getMMbash=$(pgrep -f '/mm')
	# for i in $getMMbash; do
	# 	/bin/kill $i
	# done
	# echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
	msg="Stopping Services"
	c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
	until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
	echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
	for srvc in "${!MM_SERVICES[@]}"; do
		if [[ ${srvc} != *"qbittorrent"* ]] && [[ ${srvc} != *"vpn"* ]] && [[ ${srvc} != *"wireguard"* ]]; then
			/bin/systemctl stop ${srvc} >/dev/null 2>&1 &
		fi
	done
	sleep 2s
	/bin/systemctl stop qbittorrent
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
	msg="Waiting for Services to stop"
	c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
	until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
	echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
	for srvc in "${!MM_SERVICES[@]}"; do
		if [ "MM_SERVICE_PORTS[${srvc}]" != "" ] && [[ ${srvc} != *"vpn"* ]] && [[ ${srvc} != *"wireguard"* ]]; then
			checkport=$(lsof -Pi :${MM_SERVICE_PORTS[${srvc}]} -sTCP:LISTEN -t)
			# echo "$srvc - ${MM_SERVICE_PORTS[${srvc}]} - $checkport"
			until [ "${checkport}" == "" ]; do
				sleep 1s
				checkport=$(lsof -Pi :${MM_SERVICE_PORTS[${srvc}]} -sTCP:LISTEN -t)
			done
		fi
	done
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
	msg="Shutting Down VPN Tunnel"
	c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
	until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
	echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
	
	"${VPN_STOP[@]}" >/dev/null 2>&1
	
	checked=false
	until [ "${checked}" = "" ]; do
		OUT=$(/sbin/ip link | grep "$VPN_INTERFACE")			
		#OUT=`ip a show $VPN_INTERFACE up` >/dev/null 2>&1
		if [ ${#OUT} = 0 ]; then
			checked=""
		fi
	done
	
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
	msg="Re-Adding Default Network Routes"
	c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
	until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
	echo -en "${idsCL[LightCyan]}${msg}${spc} ${idsCL[White]}: ${idsCL[Default]}"
	
	[ "$(/sbin/ip route show | grep default | cut -d' ' -f 3)" != "10.10.0.1" ] && /bin/ip route add default via 10.10.0.1 && ip route del ${vpn_server_address}
	[ $VERBOSE = true ] && echo "$(date) - Added default route back in" >> $logfile
	
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
	rm -f ${MMFOLDER}/vpninfo*
	rm -f ${MMFOLDER}/realwanip
	rm -f ${MMFOLDER}/mm.noservices*
	rm -f ${MMFOLDER}/mm.plexmount.fail*
	rm -f ${MMFOLDER}/mm.stop.checking
	
	echo "$(date) - Media Management systems stopped" >> $logfile
	
	echo
	echo -e "${idsCL[Red]}All services have been stopped${idsCL[Default]}"
	echo
	touch ${MMFOLDER}/mm.stop
}

MMSTATUS(){
	statusArray=(wireguard)
	statusArray+=(${SERVICES_CHECK[@]})
	echo
	for srvc in "${statusArray[@]}"; do
		c=0; spc=''
		spc1=$((${cw_spc}-${#MM_SERVICES[${srvc}]}))
		until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
		dispname="${MM_SERVICES[${srvc}]/(/${idsCL[LightCyan]}(}"
		echo -en " ${idsCL[White]}${dispname}${spc}${idsCL[White]}: ${idsCL[Default]}"
		
		if [ "$(systemctl is-active ${srvc})" != "active" ] && [ "${srvc}" != "wireguard" ]; then
			if [ -f ${MMFOLDER}/mm.noservices ]; then
				echo -e "${idsCL[LightCyan]}Skipping, started wtih VPN only${idsCL[Default]}"
			elif [ -f ${MMFOLDER}/mm.plexmount.fail ]; then
				echo -e "${idsCL[LightCyan]}Skipping, Plex Media not mounted${idsCL[Default]}"
			else
				echo -e "${idsCL[Red]}Not Running${idsCL[Default]}"
			fi
			
		elif [ "${srvc}" == "wireguard" ] && [ "$(/sbin/ip link | grep $VPN_INTERFACE)" == "" ]; then
			echo -e "${idsCL[Red]}Not Running${idsCL[Default]}"
			
		else
			[ "${MM_SERVICE_PORTS[${srvc}]}" != "" ] && checkport=$(lsof -Pi :${MM_SERVICE_PORTS[${srvc}]} -sTCP:LISTEN -t)
			if ([ "${MM_SERVICE_PORTS[${srvc}]}" != "" ] && [ "${checkport}" != "" ]) || [ "${MM_SERVICE_PORTS[${srvc}]}" == "" ]; then
				echo -e "${idsCL[Green]}Running${idsCL[Default]}"
			elif [ "${checkport}" == "" ]; then
				echo -e "${idsCL[LightMagenta]}Service Running, Web Port Not Accesible${idsCL[Default]}"
			fi
			
			if [[ ${srvc} == *"vpn"* ]] || [[ ${srvc} == *"wireguard"* ]]; then
				zerogw=$(/sbin/ip route show | grep 0.0.0.0 | cut -d' ' -f 3)
				defaultgw=$(/sbin/ip route show | grep default | cut -d' ' -f 3)
				
				vpnuptime=$(expr `date +%s` - $(stat -c %Y ${MMFOLDER}/vpninfo))
				msg="  |- ${idsCL[Default]}VPN/Services Uptime"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6)); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -e "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Green]}$(SHOW_TIME ${vpnuptime})${idsCL[Default]}"
				
				msg="  |- ${idsCL[Default]}0.0.0.0 Gateway"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
				until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Default]}"
				echo -e "${idsCL[Green]}$zerogw${idsCL[Default]}"
				
				msg="  |- ${idsCL[Default]}DEFAULT Gateway"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
				until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Default]}"
				
				if [ "${zerogw}" == "${defaultgw}" ] && [ "${zerogw}" == "${VPN_INTERFACE}" ]; then
					echo -e "${idsCL[Green]}$defaultgw${idsCL[Default]}"
				else
					echo -e "${idsCL[Red]}$defaultgw - Incorrect Gateways${idsCL[Default]}"
					if ([ ! -f ${MMFOLDER}/mm.stop* ] && [ "${1}" == "fix" ]) || ([ ! -f ${MMFOLDER}/mm.stop ] && [ -f ${MMFOLDER}/mm.stop.checking ] && [ "${1}" == "fix" ]); then
						echo
						echo -e "${idsCL[LightCyan]}Restarting system...${idsCL[Default]}"
						MMSTOP
						echo -en "${idsCL[LightCyan]}Pausing for 10secs...  ${idsCL[Default]}"
						sleep 10s
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
						echo
						echo -e "${idsCL[LightCyan]}Starting system back up...${idsCL[Default]}"
						echo
						MMSTART
						
						msg=" ${MM_SERVICES[wireguard]}"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
						until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]}: ${idsCL[Default]}"
						echo -e "${idsCL[Green]}Running${idsCL[Default]}"
						
						vpnuptime=$(expr `date +%s` - $(stat -c %Y ${MMFOLDER}/vpninfo))
						msg="  |- ${idsCL[Default]}VPN/Services Uptime"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6)); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -e "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Green]}$(SHOW_TIME ${vpnuptime})${idsCL[Default]}"
						
						zerogw=$(/sbin/ip route show | grep 0.0.0.0 | cut -d' ' -f 3)
						defaultgw=$(/sbin/ip route show | grep default | cut -d' ' -f 3)
						
						msg="  |- ${idsCL[Default]}0.0.0.0 Gateway"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
						until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Default]}"
						echo -e "${idsCL[Green]}$zerogw${idsCL[Default]}"
				
						msg="  |- ${idsCL[Default]}DEFAULT Gateway"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
						until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Default]}"
						
						if [ "${zerogw}" == "${defaultgw}" ] && [ "${zerogw}" == "${VPN_INTERFACE}" ]; then
							echo -e "${idsCL[Green]}$defaultgw${idsCL[Default]}"
						else
							echo -e "${idsCL[Red]}$defaultgw - Incorrect Gateways${idsCL[Default]}"
							echo
							if [ ! -f ${MMFOLDER}/mm.stop.checking ]; then
								echo -e "${idsCL[LightCyan]}Shutting down system... fix yo shit${idsCL[Default]}"
								MMSTOP
							fi
						fi
						
					fi
				fi
				
				msg="  |- ${idsCL[Default]}Verify routing through VPN"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
				until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Default]}"
				
				# mmip=$(/usr/bin/dig +short myip.opendns.com @resolver1.opendns.com)
				mmip=$(/usr/bin/dig +short +time=2 myip.opendns.com @208.67.222.222)
				if [ "${REALWANIP}" != "${mmip}" ]; then
					echo -e "${idsCL[Green]}Good${idsCL[Default]}"
				else
					echo -e "${idsCL[Red]}Not Routing${idsCL[Default]}"
					if ([ ! -f ${MMFOLDER}/mm.stop* ] && [ "${1}" == "fix" ]) || ([ ! -f ${MMFOLDER}/mm.stop ] && [ -f ${MMFOLDER}/mm.stop.checking ] && [ "${1}" == "fix" ]); then
						echo
						echo -e "${idsCL[LightCyan]}Restarting system...${idsCL[Default]}"
						MMSTOP
						echo -en "${idsCL[LightCyan]}Pausing for 10secs...  ${idsCL[Default]}"
						sleep 10s
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
						echo
						echo -e "${idsCL[LightCyan]}Starting system back up...${idsCL[Default]}"
						echo
						MMSTART
					fi
				fi
				
				msg="  |- ${idsCL[Default]}Real WAN Address"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
				until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -e "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Green]}${REALWANIP}${idsCL[Default]}"
				
				msg="  |- ${idsCL[Default]}VPN WAN Address"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}+6))
				until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -e "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Green]}${mmip}${idsCL[Default]}"
				
				### CHECK FOR PLEX MOUNT
				echo
				msg=" Verifying Plex Media Mount"
				c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
				until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -en "${idsCL[White]}${msg}${spc}${idsCL[White]} : ${idsCL[Default]}"
				
				if [ -f ${MMFOLDER}/mm.plexmount.fail2 ]; then
					echo -e "${idsCL[Red]}Not Mounted${idsCL[LightCyan]}, running services as chosen previously${idsCL[Default]}"
				
				elif [ ! -f ${PLEX_MOUNT}/mounted ]; then			
					echo -e "${idsCL[Red]}Not Mounted${idsCL[Default]}"
					
				else
					echo -e "${idsCL[Green]}Mounted${idsCL[Default]}"
					rm -f ${MMFOLDER}/mm.plexmount.fail*
				fi
				
				echo
				
				
			fi
		fi
		
	done
	echo
	echo
}

GETVPNINFO(){
	echo -e "${idsCL[Green]}VPN Connection Info${idsCL[Default]}"
	echo

	msg="Server Network"
	c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
	until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
	echo -n "${idsCL[LightCyan]}${msg}${spc}${idsCL[White]}: ${idsCL[Green]}${VPN_SERVER}${idsCL[Default]}"

}

VPNCONFIG(){
			privkey=$(/usr/bin/wg genkey)
			reqpublickey=$(echo "${privkey}" | /usr/bin/wg pubkey)
			reqpublickey="$(php -r 'echo rawurlencode($argv[1]);' -- "$reqpublickey")"
			
			rm -f ${MMFOLDER}/vpninfo
			JSON=$(curl https://${VPN_SERVER}:1443/api/v1/setup?public-key=${reqpublickey} --user "${VPN_USER}:${VPN_PASS}" -sk)			
			echo -e "vpn_publickey=\"$(echo ${JSON} | jq -r '.server_public_key')\"
vpn_server_ipv4=\"$(echo ${JSON} | jq -r '.server_ipv4')\"
vpn_client_ipv4=\"$(echo ${JSON} | jq -r '.client_ipv4')\"
vpn_routes=\"$(echo ${JSON} | jq -r '.routes')\"
vpn_server_address=\"$(echo ${JSON} | jq -r '.vpn_server_address')\"
vpn_server_port=\"$(echo ${JSON} | jq -r '.vpn_server_port')\"
" > ${MMFOLDER}/vpninfo
			source ${MMFOLDER}/vpninfo

			rm -f /etc/wireguard/${VPN_INTERFACE}.conf

			echo -e "[Interface]
PrivateKey = ${privkey}
ListenPort = 55009
MTU = 1390
DNS = 1.1.1.1
Address = ${vpn_client_ipv4}

[Peer]
PublicKey = ${vpn_publickey}
AllowedIPs = 0.0.0.0/0
Endpoint = ${vpn_server_address}:${vpn_server_port}
PersistentKeepalive = 25" >> /etc/wireguard/${VPN_INTERFACE}.conf
}

VPNSPEEDTEST(){
	echo -e "${idsCL[Green]}VPN Speedtest Comparison${idsCL[Default]}"
	DIVIDER . lightGreen
	echo
	if [ ! -f ${MMFOLDER}/mm.stop ]; then
		echo -en "${idsCL[LightCyan]}This requires all media management services to be stopped, ok (Y/n)? ${idsCL[Default]}"
		read -n 1 choice
		case "$choice" in 
			[Nn]) exit 0;; esac
		echo
		echo -en "${idsCL[LightCyan]}Stopping media management services ... ${idsCL[Default]}"
	else
		echo -en "${idsCL[LightCyan]}Verifying media management services are stopped ... ${idsCL[Default]}"
	fi
	MMSTOP >/dev/null 2>&1
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	echo
	
	echo -e "${idsCL[Green]}Running test without VPN${idsCL[Default]}"
	DIVIDER . green
	# speedtest -s 17462
	speedtest
	echo
		
	echo -en "${idsCL[LightCyan]}Starting vpn ... ${idsCL[Default]}"
	# VPNCONFIG
	# "${VPN_START[@]}" >/dev/null 2>&1
	mm start vpn >/dev/null 2>&1
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	echo
	
	sleep 5s
	
	echo -e "${idsCL[Green]}Running test with VPN${idsCL[Default]}"
	DIVIDER . green
	# speedtest -s 17462
	speedtest
	echo
	
	echo -en "${idsCL[LightCyan]}Stopping vpn ... ${idsCL[Default]}"
	# "${VPN_STOP[@]}" >/dev/null 2>&1
	MMSTOP >/dev/null 2>&1
	echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
	echo
	echo -en "${idsCL[LightCyan]}Would you like to start media management services (y/N)? ${idsCL[Default]}"
	read -n 1 choice
	echo
	case "$choice" in 
		[Yy]) MMSTART start;;
		* ) echo -e "${idsCL[Cyan]}Not starting. To start, run the command '${idsCL[Green]}mm start${idsCL[LightCyan]}'${idsCL[Default]}";echo;echo;;
	esac
}

UPDATESERVICE(){
	if [ "${1}" != "" ]; then
		usrvc=${1}
		echo "${usrvc} Update" > ${MMFOLDER}/mm.update.stop
		echo "$(date) - Updating Service (${usrvc}) : Starting" >> $logfile
		echo
		echo -e "${idsCL[Green]}Updating ${usrvc^} Service${idsCL[Default]}"
		DIVIDER . lightGreen
		
		if [ "${usrvc}" == "organizr" ]; then
			msg="Updating Organizr Web UI Interface"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
			echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"
			cd /var/www/media.scity.us/html >/dev/null 2>&1
			
			if [ "`git log --pretty=%H ...refs/heads/v2-master^ | head -n 1`" != "`git ls-remote origin -h refs/heads/v2-master |cut -f1`" ]; then
				/usr/bin/git stash >/dev/null 2>&1
				/usr/bin/git pull >/dev/null 2>&1
				/bin/chown -Rf www-data:www-data /var/www/media.scity.us/html
				echo -e "${idsCL[Green]}Updated${idsCL[Default]}"
				
				msg="Restarting NGINX"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"
				/bin/systemctl restart nginx >/dev/null 2>&1
				echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			else
				echo -e "${idsCL[LightCyan]}Update not needed${idsCL[Default]}"
			fi

			echo "$(date) - Updated Organizr" >> $logfile
			
		else
			if [[ " ${UPDATE_SERVICES[*]} " =~ " ${usrvc} " ]]; then
		
				msg="Stopping service and preparing"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
				echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"
	
				rm -f ${MMFOLDER}/logs/update.${usrvc}
				touch ${MMFOLDER}/logs/update.${usrvc}
	
				/bin/systemctl stop ${usrvc} >> ${MMFOLDER}/logs/update.${usrvc}
				[ "${usrvc}" == "radarr" ] && [[ " ${SERVICES_CHECK[*]} " =~ " radarr3d " ]] && /bin/systemctl stop radarr3d >> ${MMFOLDER}/logs/update.${usrvc}
	
				tmpfile=/tmp/${usrvc}-update.tar.gz
				bak=/opt/Backups/${usrvc}.opt.tgz
				bakcfg=/opt/Backups/${usrvc}.cfg.tgz
				[[ -f ${bak} ]] && rm -f "${bak}" &>/dev/null
				[[ -f ${tmpfile} ]] && rm -f "${tmpfile}" &>/dev/null
				[ ! -d /opt/Backups ] && mkdir /opt/Backups
		
				echo -e "${idsCL[Green]}Done${idsCL[Default]}"
		
				if [ "${MM_UPDATE_REPO[${usrvc}]}" != "" ] && [ "${MM_UPDATE_REPO[${usrvc}]}" != "systemd" ]; then
	
					msg="Finding latest update url"
					c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
					until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
					echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"
		
					if [[ $BETA_SERVICES == *${usrvc}* ]]; then
						latest_release_url=`curl -s https://api.github.com/repos/${MM_UPDATE_REPO[${usrvc}]}/${usrvc}/releases | jq -r '.[0].assets[].browser_download_url' | grep "${MM_UPDATE_REPO_GREP[${usrvc}]}" | cut -d '"' -f 4 | grep -i 'https://'`
						echo "$(date) - Updating Service (${usrvc}) : BETA UPDATEURL = ${latest_release_url}" >> $logfile
						beta="BETA "
					else
						latest_release_url=`curl -s https://api.github.com/repos/${MM_UPDATE_REPO[${usrvc}]}/${usrvc}/releases/latest | jq -r '.assets[].browser_download_url' | grep "${MM_UPDATE_REPO_GREP[${usrvc}]}" | cut -d '"' -f 4 | grep -i 'https://'`
						echo "$(date) - Updating Service (${usrvc}) : UPDATEURL = ${latest_release_url}" >> $logfile
						beta=""
					fi
					installed_ver=`echo ${latest_release_url} | cut -d/ -f8`
					echo -e "${idsCL[Green]}Done${idsCL[Default]}"
					
					if [ "${latest_release_url}" != "${installed_ver}" ]; then
						msg="Installing version"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -e "${idsCL[White]}${msg}${spc} : ${idsCL[Green]}${installed_ver}${idsCL[Default]}"
	
						msg="Downloading and updating"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
						until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"

						if curl --output /dev/null --silent --head --fail $latest_release_url; then
							wget -qO ${tmpfile} $latest_release_url >> ${MMFOLDER}/logs/update.${usrvc}
							if [[ ( $? -eq 0 ) && ( -f ${tmpfile} ) ]]; then
								if [ "${usrvc}" != "bazarr" ]; then
									rm -Rf /opt/${usrvc^} >> ${MMFOLDER}/logs/update.${usrvc}
									mkdir /opt/${usrvc^} >> ${MMFOLDER}/logs/update.${usrvc}
								fi
								/bin/tar -cpPf $bak /opt/${usrvc^} >> ${MMFOLDER}/logs/update.${usrvc}
								[ "${MM_SERVICE_CFG[${usrvc}]}" != "" ] && [ -d ${MM_SERVICE_CFG[${usrvc}]} ] && /bin/tar -cpPf $bakcfg ${MM_SERVICE_CFG[${usrvc}]} >> ${MMFOLDER}/logs/update.${usrvc}

								if [ "${usrvc}" == "ombi" ]; then
									/bin/tar xfP ${tmpfile} -C /opt/${usrvc^} >> ${MMFOLDER}/logs/update.${usrvc}
								elif [ "${usrvc}" == "bazarr" ]; then
									/usr/bin/unzip -oqq ${tmpfile} -d /opt/${usrvc^}
								else
									/bin/tar xfP ${tmpfile} -C /opt >> ${MMFOLDER}/logs/update.${usrvc}
								fi
								chown -R user:users /opt/${usrvc^} >> ${MMFOLDER}/logs/update.${usrvc}
							fi
						fi
				
						rm -f ${tmpfile} &>/dev/null
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
	
				
					elif [ "${MM_UPDATE_REPO[${usrvc}]}" == "systemd" ]; then
				
						msg="Installing version"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
						until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -e "${idsCL[White]}${msg}${spc} : ${idsCL[Green]}${installed_ver}${idsCL[Default]}"
				
						msg="Updating service"
						c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
						until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
						echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"
				
						installed_ver=`dpkg -s ${usrvc} | grep Version`
						/usr/bin/apt install ${usrvc} >/dev/null 2>&1
						/bin/systemctl disable ${usrvc} >/dev/null 2>&1
				
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
				
					fi
			
					[ ! -f ${MMFOLDER}/vers.info ] && touch ${MMFOLDER}/vers.info
					/bin/sed -i /${usrvc}/d ${MMFOLDER}/vers.info
					echo "${usrvc}_VER=\"${installed_ver}\"" >> ${MMFOLDER}/vers.info
			
					msg="Starting service back up"
					c=0; spc=''; spc1=$((${cw_spc}-${#msg}))
					until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
					echo -en "${idsCL[White]}${msg}${spc} : ${idsCL[Default]}"
		
					OUT=$(ip link | grep "$VPN_INTERFACE") >/dev/null 2>&1
					if [[ " ${SERVICES_CHECK[*]} " =~ " ${usrvc} " ]] && [ ! -f ${MMFOLDER}/mm.noservices ] && [ ! `find /opt/idssys/mediamanager/ -name 'mm.plexmount.fail*'` ]; then
						/bin/systemctl disable ${usrvc} >> ${MMFOLDER}/logs/update.${usrvc}
						/bin/systemctl start ${usrvc} >> ${MMFOLDER}/logs/update.${usrvc}
						[ "${usrvc}" == "radarr" ] && [[ " ${SERVICES_CHECK[*]} " =~ " radarr3d " ]] && /bin/systemctl start radarr3d >> ${MMFOLDER}/logs/update.${usrvc}
						echo -e "${idsCL[Green]}Done${idsCL[Default]}"
					else
						echo -e "${idsCL[LightCyan]}Skipping${idsCL[Default]}"
					fi
		
					echo "$(date) - Updating Service (${usrvc}) : Completed" >> $logfile
					echo -e "${idsCL[Green]}${usrvc^} Service has been updated${idsCL[Default]}"
					
				else
					msg="Latest Version"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
					echo -e "${idsCL[White]}${msg}${spc} : ${idsCL[Green]}${installed_ver}${idsCL[Default]}"
					
					cver=${usrvc}_VER
					msg="Current Version"; c=0; spc=''; spc1=$((${cw_spc}-${#msg})); until [ $c = ${spc1} ]; do spc="${spc} "; c=`expr $c + 1`; done
					echo -e "${idsCL[White]}${msg}${spc} : ${idsCL[Green]}${!cver}${idsCL[Default]}"	
					echo -e " ${idsCL[White]}Update Not Needed${idsCL[Green]}${installed_ver}${idsCL[Default]}"
					
				fi
			
			else
				echo -e "${idsCL[Red]}Not currently available to update${idsCL[Default]}"
			
			fi
		fi
		
	else
		echo -e "${idsCL[Red]}No service selected for update${idsCL[Default]}"
	fi
	rm -f ${MMFOLDER}/mm.update.stop
	
}

SHOWSRVCUPDATES(){
	echo -e "${idsCL[LightCyan]}Latest Update URLs Available${idsCL[Default]}"
	DIVIDER . lightGreen
	
	for usrvc in "${UPDATE_SERVICES[@]}"; do
		if [ "${usrvc}" != "organizr" ]; then
			if [ "${MM_UPDATE_REPO[${usrvc}]}" == "systemd" ]; then
			
				repo_ver=`dpkg -s ${usrvc} | grep Version`
				echo -e "${idsCL[LightCyan]}${MM_SERVICES[${usrvc}]}:${idsCL[Default]} Apt Repo Controller"
				echo -e "${idsCL[LightGreen]}Repo Release   : ${repo_ver}${idsCL[Default]}"
			else
			
				beta_url=`curl -s https://api.github.com/repos/${MM_UPDATE_REPO[${usrvc}]}/${usrvc}/releases | jq -r '.[0].assets[].browser_download_url' | grep "${MM_UPDATE_REPO_GREP[${usrvc}]}" | cut -d '"' -f 4 | grep -i 'https://'`
				# beta_url=`curl -s https://api.github.com/repos/${MM_UPDATE_REPO[${usrvc}]}/${usrvc}/releases | jq -r '.[0].assets[].browser_download_url' | grep "${MM_UPDATE_REPO_GREP[${usrvc}]}" | cut -d '"' -f 4 | grep -i 'https://' | cut -d/ -f8`
				beta_ver=`echo ${beta_url} | cut -d/ -f8`
		
				latest_url=`curl -s https://api.github.com/repos/${MM_UPDATE_REPO[${usrvc}]}/${usrvc}/releases/latest | jq -r '.assets[].browser_download_url' | grep "${MM_UPDATE_REPO_GREP[${usrvc}]}" | cut -d '"' -f 4 | grep -i 'https://'`
				latest_ver=`echo ${latest_url} | cut -d/ -f8`
			
				[[ $BETA_SERVICES == *${usrvc}* ]] && cur='Beta' || cur='Stable'
				echo -e "${idsCL[LightCyan]}${MM_SERVICES[${usrvc}]}:${idsCL[Default]} ${cur} Selected"
				echo -e "${idsCL[LightGreen]}Stable Release : ${latest_ver}${idsCL[Default]}"
				echo -e "${idsCL[LightGreen]}Beta Release   : ${beta_ver}${idsCL[Default]}"
			fi
			cver=${usrvc}_VER
			echo -e "${idsCL[LightCyan]}Current vers.  : ${!cver}${idsCL[Default]}"

			# echo
			# echo ${latest_url}
			# echo ${beta_url}
			echo
			echo
		fi
	done
	
}

MMSETUP(){
	echo -e "${idsCL[Green]}Media Manager Setup Scripts${idsCL[Default]}"
	echo
	MMSTOP
	
	echo -en "${idsCL[LightCyan]}Would you like to configure the hostname and network settings (y/N)? ${idsCL[Default]}"
	read -n 1 choice
	case "$choice" in 
		[Yy])
			echo
			echo -en "${idsCL[LightYellow]}Hostname [Default='${idsCL[White]}Media-Manager${idsCL[LightYellow]}']: ${idsCL[Default]}"
			read -e HOSTNAME
			[ "${HOSTNAME}" == "" ] && HOSTNAME="Media-Manager"
			echo
			REPIP=`hostname -I`
			REPIP=${REPIP/ /}
			echo -en "${idsCL[LightYellow]}IP Address [Current='${idsCL[White]}${REPIP}${idsCL[LightYellow]}']: ${idsCL[Default]}"
			read -e IPADDRESS
			[ "${IPADDRESS}" == "" ] && IPADDRESS=${REPIP}
			echo
			REPSUB=`/sbin/ifconfig eth0 | awk '/netmask/{ print $4;} '`
			echo -en "${idsCL[LightYellow]}Subnet Mask [Current='${idsCL[White]}${REPSUB}${idsCL[LightYellow]}']: ${idsCL[Default]}"
			read -e SUBNET
			[ "${SUBNET}" == "" ] && SUBNET=${REPSUB}
			echo
			REPGW=`route -n | grep 'UG[ \t]' | awk '{print $2}'`
			echo -en "${idsCL[LightYellow]}Gateway IP [Current='${idsCL[White]}${REPGW}${idsCL[LightYellow]}']: ${idsCL[Default]}"
			read -e GATEWAY
			[ "${GATEWAY}" == "" ] && GATEWAY=${REPGW}
			echo
			REPPRIDNS=`resolvectl -i eth0 dns | awk '/eth0/{ print $4;} '`
			echo -en "${idsCL[LightYellow]}Primary DNS [Current='${idsCL[White]}${REPPRIDNS}${idsCL[LightYellow]}']: ${idsCL[Default]}"
			read -e PRIDNS
			[ "${PRIDNS}" == "" ] && PRIDNS=${REPPRIDNS}
			echo
			REPSECDNS=`resolvectl -i eth0 dns | awk '/eth0/{ print $5;} '`
			echo -en "${idsCL[LightYellow]}Secondary DNS (optional) [Current='${idsCL[White]}${REPSECDNS}${idsCL[LightYellow]}']: ${idsCL[Default]}"
			read -e SECDNS
			[ "${SECDNS}" == "" ] && SECDNS=${REPSECDNS}
			echo
			echo
			echo "Confirm settings:"
			echo -e "${idsCL[LightCyan]}Hostname      : ${idsCL[Green]}${HOSTNAME}${idsCL[Default]}"
			echo -e "${idsCL[LightCyan]}IP Address    : ${idsCL[Green]}${IPADDRESS}${idsCL[Default]}"
			echo -e "${idsCL[LightCyan]}Subnet Mask   : ${idsCL[Green]}${SUBNET}${idsCL[Default]}"
			echo -e "${idsCL[LightCyan]}Gateway IP    : ${idsCL[Green]}${GATEWAY}${idsCL[Default]}"
			echo -e "${idsCL[LightCyan]}Primary DNS   : ${idsCL[Green]}${PRIDNS}${idsCL[Default]}"
			echo -e "${idsCL[LightCyan]}Secondary DNS : ${idsCL[Green]}${SECDNS}${idsCL[Default]}"
			echo
			echo -en "${idsCL[LightCyan]}Is this correct (Y/n)? ${idsCL[Default]}"
			read -n 1 choice
			case "$choice" in 
				[Nn]) MMSETUP; exit 0;;
			esac
			
			echo -en "${idsCL[LightCyan]}Making configuration changes ... ${idsCL[Default]}"
			
			sudo hostnamectl set-hostname ${HOSTNAME} >/dev/null 2>&1
			sudo sed -i '/127.0.1.1/d' /etc/hosts >/dev/null 2>&1
			echo "127.0.1.1       ${HOSTNAME} mm" >> /etc/hosts
			
			NEWSUB=`IPprefix_by_netmask ${SUBNET}`
			REPSUB=`IPprefix_by_netmask ${REPSUB}`
			sed -i "s/${REPIP}\/${REPSUB}/${IPADDRESS}\/${NEWSUB}/g" /etc/netplan/eth0.yaml >/dev/null 2>&1
			sed -i "s/${REPIP}\/${REPSUB}/${IPADDRESS}\/${NEWSUB}/g" /etc/netplan/eth0.yaml >/dev/null 2>&1
			
			[ "${SECDNS}" != "" ] && DNS="${PRIDNS},${SECDNS}" || DNS="${PRIDNS}"
			[ "${REPSECDNS}" != "" ] && REPDNS="${REPPRIDNS},${REPSECDNS}" || REPDNS="${REPPRIDNS}"
			sed -i "s/${REPDNS}/${DNS}/g" /etc/netplan/eth0.yaml >/dev/null 2>&1
			
			sed -i "s/${REPGW}/${GATEWAY}/g" /etc/netplan/eth0.yaml >/dev/null 2>&1
			
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			echo
			
			if [ "$(hostname)" != "${HOSTNAME}" ] || [ "$REPIP" != "$IPADDRESS" ] || [ "$REPSUB" != "$NEWSUB" ] || [ "$REPGW" != "$GATEWAY" ] || [ "$REPDNS" != "$DNS" ]; then
				NETCHNG=true
			else
				NETCHNG=false
			fi
			
			;;
	esac
	
	echo
	echo -en "${idsCL[LightCyan]}This will reset the MM app config, do you wish to continue (y/N)? ${idsCL[Default]}"
	read -n 1 choice
	case "$choice" in 
		[Yy])
			echo
			echo -en "${idsCL[LightCyan]}Resetting config ... ${idsCL[Default]}"
			sed -i '/SERVICESCHECK/d' ${MMFOLDER}/settings.conf
			sed -i '/PUSHOVER_/d' ${MMFOLDER}/settings.conf
			sed -i '/EMAIL_NOTICE/d' ${MMFOLDER}/settings.conf
			sed -i '/OPTIONAL/d' ${MMFOLDER}/settings.conf
			sed -i '/^$/d' ${MMFOLDER}/settings.conf
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			
			if [ "${SERVICESCHECK}" != "" ]; then
				echo
				srvcs2=${SERVICESCHECK/snap.tautulli.tautulli/tautulli}
				echo -e "${idsCL[LightCyan]}Run previous media management services${idsCL[Default]}"
				echo -en "${idsCL[LightYellow]}['${idsCL[White]}${srvcs2}${idsCL[LightYellow]}']${idsCL[LightCyan]} (Y/n)? ${idsCL[Default]}"
				read -n 1 choice
				case "$choice" in
					[Nn]) SERVICESCHECK="";;
					* ) srvcs=${srvcs2};;esac
			fi
			if [ "${SERVICESCHECK}" == "" ] && [ "${srvcs}" == "" ]; then
				export NEWT_COLORS=''
				srvcs=$(whiptail --title "Media Manager Service Selector" --checklist --separate-output \
				"\nPlease select which services to enable for this system:" 0 70 16 \
				"bazarr" "Bazarr (Subtitle Manager)" ON \
				"jackett" "Jackett (Torrent Indexing Manager)       " ON \
				"lidarr" "Lidarr (Music Manager)" OFF \
				"ombi" "Ombi (Download Requester)" ON \
				"qbittorrent" "qBittorrent (Torrent Downloader)" ON \
				"radarr" "Radarr (Movie Manager)" ON \
				"radarr3d" "Radarr3D (3D Movie Manager)" OFF \
				"sonarr" "Sonarr (TV Show Manager)" ON \
				"tautulli" "Tautulli (Plex Stats)" ON 3>&1 1>&2 2>&3)
				exitstatus=$?; srvcs="$(join_by , $srvcs)";
			fi
			
			
			if [ "${srvcs}" != "" ]; then
				echo
				echo
				echo -e "${idsCL[LightCyan]}Selected services: ${idsCL[Green]}${srvcs}${idsCL[Default]}"
				srvcs=${srvcs/tautulli/snap.tautulli.tautulli}
				echo -e "\nSERVICESCHECK=${srvcs}\n\n#[OPTIONAL]" >> ${MMFOLDER}/settings.conf
				echo
			else
				echo -e "\n# SERVICESCHECK=\n\n#[OPTIONAL]" >> ${MMFOLDER}/settings.conf
			fi
	
			echo
			echo -e "${idsCL[LightCyan]}You may choose to setup notifications by either SMTP and/or Pushover:${idsCL[Default]}"
		
			if [ "${EMAIL_NOTICE}" != "" ]; then
				echo -en "${idsCL[LightYellow]}Use previous email address [${idsCL[White]}${EMAIL_NOTICE}${idsCL[LightYellow]}] (Y/n)? ${idsCL[Default]}"
				read -n 1 choice
				case "$choice" in
					[Nn]) EMAIL_NOTICE="";;esac
			fi
			if [ "${EMAIL_NOTICE}" == "" ]; then
				echo; echo -e -n "${idsCL[LightYellow]}(optional) Email notification address: ${idsCL[Default]}"
				read -e EMAIL_NOTICE
			fi
			[ "${EMAIL_NOTICE}" != "" ] && echo "EMAIL_NOTICE=${EMAIL_NOTICE}" >> ${MMFOLDER}/settings.conf || echo "# EMAIL_NOTICE=email@address.com" >> ${MMFOLDER}/settings.conf
			
			echo
			if [ "${PUSHOVER_APP_TOKEN}" != "" ]; then
				echo -en "${idsCL[LightYellow]}Use previous Pushover App Token [${idsCL[White]}${PUSHOVER_APP_TOKEN}${idsCL[LightYellow]}] (Y/n)? ${idsCL[Default]}"
				read -n 1 choice
				case "$choice" in
					[Nn]) PUSHOVER_APP_TOKEN="";;esac
			fi
			if [ "${PUSHOVER_APP_TOKEN}" == "" ]; then
				echo; echo -e -n "${idsCL[LightYellow]}(optional) Pushover App Token: ${idsCL[Default]}"
				read -e PUSHOVER_APP_TOKEN
			fi
			[ "${PUSHOVER_APP_TOKEN}" != "" ] && echo "PUSHOVER_APP_TOKEN=\"${PUSHOVER_APP_TOKEN}\"" >> ${MMFOLDER}/settings.conf || echo "# PUSHOVER_APP_TOKEN=\"\"" >> ${MMFOLDER}/settings.conf
			
			echo
			if [ "${PUSHOVER_APP_TOKEN}" != "" ]; then
				if [ "${PUSHOVER_USER_TOKEN}" != "" ]; then
					echo -en "${idsCL[LightYellow]}Use previous Pushover User Token [${idsCL[White]}${PUSHOVER_USER_TOKEN}${idsCL[LightYellow]}] (Y/n)? ${idsCL[Default]}"
					read -n 1 choice
					case "$choice" in
						[Nn]) PUSHOVER_USER_TOKEN="";;esac
				fi
				if [ "${PUSHOVER_USER_TOKEN}" == "" ]; then
					echo; echo -e -n "${idsCL[LightYellow]}(optional) Pushover User Token: ${idsCL[Default]}"
					read -e PUSHOVER_USER_TOKEN
				fi
				[ "${PUSHOVER_USER_TOKEN}" != "" ] && echo "PUSHOVER_USER_TOKEN=\"${PUSHOVER_USER_TOKEN}\"" >> ${MMFOLDER}/settings.conf || echo "# PUSHOVER_USER_TOKEN=\"\"" >> ${MMFOLDER}/settings.conf
				echo
			else
				echo "# PUSHOVER_USER_TOKEN=\"\"" >> ${MMFOLDER}/settings.conf
			fi
			
			source /opt/idssys/mediamanager/settings.conf
			IFS=,; SERVICES_CHECK=(${SERVICESCHECK}); unset IFS
			
			echo
			echo -en "${idsCL[LightCyan]}Would you like to update media management services (y/N)? ${idsCL[Default]}"
			read -n 1 choice
			case "$choice" in
				[Yy]) for usrvc in "${UPDATE_SERVICES[@]}"; do
						[ "${MM_UPDATE_REPO[${usrvc}]}" != "" ] && UPDATESERVICE ${usrvc}
					done;;
				* ) tmp='';;
			esac
			
			CNFG=true
			
		;;
	*)	tmp='';;
	esac
	
	
	echo
	echo -en "${idsCL[LightCyan]}Would you like to setup an SSH mount for Plex Media, requires linux Plex server (y/N)? ${idsCL[Default]}"
	read -n 1 choice
	case "$choice" in 
		[Yy])
			if [ "$(dpkg-query -W --showformat='${Status}\n' grepcidr | grep "install ok installed")" == "" ]; then
				echo
				echo -en "${idsCL[LightCyan]}Installing requirements ... ${idsCL[Default]}"
				sudo apt -y install sshfs >/dev/null 2>&1
				apt install sshfs -y
				echo -e "${idsCL[Green]}Done${idsCL[Default]}"

			fi
			
			echo
			echo -en "${idsCL[LightYellow]}Plex Server IP/Hostname: ${idsCL[Default]}"
			read -e PLEXSERVER
			echo
			echo -en "${idsCL[LightYellow]}File Access Username: ${idsCL[Default]}"
			read -e PLEXUSER
			echo
			echo -en "${idsCL[LightYellow]}File Access Password: ${idsCL[Default]}"
			read -e PLEXPASSWORD
			echo
			echo -en "${idsCL[LightYellow]}Plex Media Folder location [ ex. /srv/media-data ] : ${idsCL[Default]}"
			read -e PLEXFOLDER
			echo
			
			echo -en "${idsCL[LightCyan]}Verifying local SSH key, otherwise generating one ... ${idsCL[Default]}"
			if [ ! -f /root/.ssh/id_rsa.pub ]; then
				echo
				echo -e "${idsCL[LightYellow]}Generating new key, enter no password, and keep defaults: ${idsCL[Default]}"
				echo
				sudo ssh-keygen -t rsa
			fi
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			sudo ssh-copy-id ${PLEXUSER}@${PLEXSERVER}
			
			echo
			echo -e "${idsCL[LightCyan]}Configuring and mounting ... ${idsCL[Default]}"
			if [ "${PLEXSERVER}" != "" ] && [ "${PLEXUSER}" != "" ] && [ "${PLEXPASSWORD}" != "" ] && [ "${PLEXFOLDER}" != "" ]; then
				sudo sed -i '/\/mnt\/plex-media/d' /etc/fstab
				sudo echo "sshfs#${PLEXUSER}@${PLEXSERVER}:${PLEXFOLDER} /mnt/plex-media fuse ,_netdev,reconnect,allow_other,umask=002,gid=100,uid=1000,IdentityFile=/root/.ssh/id_rsa 0 0" >> /etc/fstab
				umount /mnt/plex-media >/dev/null 2>&1
				mount -a >/dev/null 2>&1
				sleep 2s
				echo -e "${idsCL[Green]}Done${idsCL[Default]}"
				echo
				echo -e "${idsCL[LightCyan]}Verify the following folder structure looks correct:${idsCL[Default]}"
				ls -l /mnt/plex-media
				echo -en "${idsCL[LightCyan]}Is the above folder your plex media (Y/n)? ${idsCL[Default]}"
				read -n 1 choice
				case "$choice" in 
					[Nn]) echo -e "${idsCL[Magenta]}Missing info, configure mounting to '${idsCL[White]}/mnt/plex-media${idsCL[Magenta]}' manually${idsCL[Default]}";;
					* ) 
					echo
					echo -en "${idsCL[LightCyan]}Adding the file 'mounted', to the plex media folder, this file must exist for the system to know its mounted properly ... ${idsCL[Default]}"
					touch /mnt/plex-media/mounted
					echo -e "${idsCL[Green]}Done${idsCL[Default]}"
					;;
				esac
				
				echo -e "${idsCL[Green]}Your Plex Media is now mounted, and will automatically remount at startup.${idsCL[Default]}"
								
			else
				echo
				echo -e "${idsCL[Magenta]}Missing info, configure mounting to '${idsCL[White]}/mnt/plex-media${idsCL[Magenta]}' manually${idsCL[Default]}"
			fi
			
			;;
		* )
			echo -e "${idsCL[Magenta]}Make sure to manually configure mounting to '${idsCL[White]}/mnt/plex-media${idsCL[Magenta]}' ${idsCL[Default]}"
			;;
	esac
	
	
	if [ "${NETCHNG}" == "true" ] || [ "${CNFG}" == "true" ]; then
		if [ "${NETCHNG}" == "true" ]; then
			echo
			echo -en "${idsCL[LightCyan]}A reboot is recommended, would you like to reboot now (Y/n)? ${idsCL[Default]}"
			read -n 1 choice
			case "$choice" in 
				[Nn]) echo;;
				* ) reboot;;
			esac
		else
			echo
			echo -en "${idsCL[LightCyan]}Would you like to start media management services (y/N)? ${idsCL[Default]}"
			read -n 1 choice
			echo
			case "$choice" in 
				[Yy]) MMSTART start;;
				* ) echo -e "${idsCL[Cyan]}Not starting. To start, run the command '${idsCL[Green]}mm start${idsCL[LightCyan]}'${idsCL[Default]}";echo;echo;;
			esac
			
		fi
	fi
	
	echo
	echo -e "${idsCL[LightCyan]}The following are Media Manager (mm) usage commands:${idsCL[Default]}"
	DIVIDER . lightGreen
	USAGE
	
	# cat ${MMFOLDER}/settings.conf
}

USAGE(){
	echo -e " Usage: ${idsCL[LightCyan]}mm {option}"
	echo
	echo -e "    ${idsCL[Yellow]}start                      ${idsCL[Default]}--> Start services"
	echo -e "    ${idsCL[Yellow]}stop                       ${idsCL[Default]}--> Stop services"
	echo -e "    ${idsCL[Yellow]}restart                    ${idsCL[Default]}--> Restart services"
	echo -e "    ${idsCL[Yellow]}update-allservices         ${idsCL[Default]}--> Update all services"
	echo -e "    ${idsCL[Yellow]}update-service <service>   ${idsCL[Default]}--> Update specified service"
	echo -e "    ${idsCL[Yellow]}update-list                ${idsCL[Default]}--> List available releases"
	echo
	echo -e "    ${idsCL[Yellow]}status                     ${idsCL[Default]}--> Check Status on VPN and Media Services"
	echo -e "    ${idsCL[Yellow]}vpninfo                    ${idsCL[Default]}--> Show VPN Info"
	echo -e "    ${idsCL[Yellow]}speedtest                  ${idsCL[Default]}--> Run Speedtest Comparison with VPN"
	echo
	echo -e "    ${idsCL[Yellow]}cron                       ${idsCL[Default]}--> Crontab job for maintaining system (run */1 min)"
	echo -e "    ${idsCL[Yellow]}update                     ${idsCL[Default]}--> Check for and install new MM updates"
	echo -e "    ${idsCL[Yellow]}clear                      ${idsCL[Default]}--> Clear all tmp system files, not normally needed"
	echo -e "    ${idsCL[Yellow]}setup                      ${idsCL[Default]}--> Setup/Reconfigure Settings (Network/MM Config/SSHFS Mount)"
	echo ""
	echo ""
}


if [ ! -f ${MMFOLDER}/mm.update.stop ]; then
	[ "${2}" == "q" ] && [ "${action}" == "check" ] && [ ! -f ${MMFOLDER}/mm.stop ] && echo -e "\n\n$(date) - Starting log #############################\n" >> ${outputlogfile}
	if [ -f ${MMFOLDER}/mm.stop ]; then
		stoppedsince=`date +%s`-$(stat -c %Y ${MMFOLDER}/mm.stop)
		stopmsg="${idsCL[Yellow]}The system has currently been stopped for '$(SHOW_TIME ${stoppedsince})'.\n${idsCL[LightCyan]}(You'll need to run \"mm start\" to start services again)${idsCL[Default]}"
	fi
	case $action in
		start | check)
			[ "${2}" == "cron" ] && MMCRONCHECK
			
			if [ -f ${MMFOLDER}/mm.stop ] && [ "${action}" == "check" ]; then
				if [ "${2}" != "q" ]; then
					echo -e "${stopmsg}"
					# [ $VERBOSE = true ] && echo "$(date) - Not checking, system has been stopped" >> $logfile
					echo
				fi
				exit 1
			elif [ "${VPN_USER}" == "" ] || [ "${VPN_PASS}" == "" ] || [ "${VPN_SERVER}" == "" ]; then
				echo "$(date) - VPN User Info Missing" >> $logfile
				echo -e "${idsCL[Red]}VPN User Info Missing${idsCL[Default]}"
				echo 
				exit 1
			elif [ ! -f ${MMFOLDER}/mm.stop ] && [ -f ${MMFOLDER}/mm.stop.checking ]; then
				checkstopped=`expr $(date +%s) - $(stat -c %Y ${MMFOLDER}/mm.stop.checking)`
				if [ $checkstopped -gt 900 ]; then
					rm -f ${MMFOLDER}/mm.stop*
					echo "$(date) - Bash script stuck in stop mode after doing a check, will restart" >> $logfile
					SENDNOTICE "MM Script Error" "Bash script stuck in check mode, restarting system"
					MMSTOP
					rm -f ${MMFOLDER}/mm.stop*
					getStuckMM=$(pgrep -f '/mm')
					for i in $getStuckMM; do
						/bin/kill $i
					done
				else
					exit 1
				fi
			fi

			[ ! -f ${MMFOLDER}/mm.stop ] && MMSTART ${action} ${2}
			[ "${action}" != "status" ] && rm -f ${MMFOLDER}/mm.stop.checking
			;;
		stop)
			MMSTOP
			;;
		restart)
			if [ -f ${MMFOLDER}/mm.stop ]; then
				echo -e "${stopmsg}"
				echo
				exit 1
			fi
			[ -f ${MMFOLDER}/mm.noservices ] && rv="vpn" || rv=""
			MMSTOP
			echo -en "${idsCL[LightCyan]}Pausing for 30s to ensure a new VPN WAN IP, or press any key to continue with potentially getting a new address ... ${idsCL[Default]}"
			read -et 30 -n 1
			echo -e "${idsCL[Green]}Done${idsCL[Default]}"
			MMSTART ${action} ${rv}
			;;
		status)
			if [ -f ${MMFOLDER}/mm.stop ]; then
				echo -e "${stopmsg}"
				echo
			fi
			MMSTATUS ${2}
			;;
		setup) MMSETUP;;
		vpninfo) GETVPNINFO;;
		speedtest) VPNSPEEDTEST;;
		update);;
		update-service) UPDATESERVICE ${2};;
		update-allservices)
			# for usrvc in "${SERVICES_CHECK[@]}"; do
			for usrvc in "${UPDATE_SERVICES[@]}"; do
				[ "${MM_UPDATE_REPO[${usrvc}]}" != "" ] && UPDATESERVICE ${usrvc}
			done
			;;
		update-list) SHOWSRVCUPDATES;;
		clear) echo -e "${idsCL[LightCyan]}Clearing all mm.* files  ${idsCL[Default]}"; echo;;
		*) USAGE;;
		
	esac
	
else
	echo -e "${idsCL[Yellow]}Part of the system is currently updating, please try again shortly.\nUpdates usually only take 1-3mins.${idsCL[Default]}"
	echo
fi


exit 0