voltron/octodocker_deploy
1
0
Fork 0
Code Issues Pull Requests Releases Activity

add libffi-dev package

Browse Source
This commit is contained in:
paukstelis
2022-09-25 09:28:01 -04:00
parent a898a16f81
commit bd085bfb3b
2 changed files with 3 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -23,6 +23,7 @@ These files provide a simple bash script for quickly deploying multiple octoprin
* Continue until you have added all the printers you want to use. * Continue until you have added all the printers you want to use.
* haproxy entries are updated so you can connect via http://octopi.local/instancename/ (trailing slash is needed). * haproxy entries are updated so you can connect via http://octopi.local/instancename/ (trailing slash is needed).
* Please note, haproxy entries are NOT used for webcams once you use this system. Connect to them via hostname:port. * Please note, haproxy entries are NOT used for webcams once you use this system. Connect to them via hostname:port.
* To add more printers at a later date, just run the script again!
* General Linux (Ubuntu/Mint/RPiOS/Debian/Fedora/Arch/etc.) * General Linux (Ubuntu/Mint/RPiOS/Debian/Fedora/Arch/etc.)
* __You do not need to install OctoPrint using any Wiki instructions, snap, etc. The script will do it for you.__ * __You do not need to install OctoPrint using any Wiki instructions, snap, etc. The script will do it for you.__
* octoprint_deploy uses systemd services, so avoid distros that do not use systemd by default (MX Linux) * octoprint_deploy uses systemd services, so avoid distros that do not use systemd by default (MX Linux)
@@ -44,6 +45,7 @@ These files provide a simple bash script for quickly deploying multiple octoprin
* If your printer does not have a serial number (all Creality printers) allow the auto-detection to time-out and it will detect by the USB port you plugged it in to. * If your printer does not have a serial number (all Creality printers) allow the auto-detection to time-out and it will detect by the USB port you plugged it in to.
* After adding the first instance, the template instance will be shutdown. This is normal. * After adding the first instance, the template instance will be shutdown. This is normal.
* Add as many instances as you have printers, following the instructions. * Add as many instances as you have printers, following the instructions.
* To add more printers at a later date, or to add cameras to an instance if you did not do that while setting up the printers, simply run the script again (`sudo octoprint_deploy/octoprint_deploy.sh`) and choose the appropriate options.
* Remember, camera installed with this script are experimental and always will be. The script makes some basic assumptions that you may need to change later. Cameras suck up quite a bit of USB bandwidth so while it is quite straightforward to run 10 printers with a modest computer, you can't also run 10 cameras. * Remember, camera installed with this script are experimental and always will be. The script makes some basic assumptions that you may need to change later. Cameras suck up quite a bit of USB bandwidth so while it is quite straightforward to run 10 printers with a modest computer, you can't also run 10 cameras.
* What else can you do? * What else can you do?
* Remove instances * Remove instances

1
octoprint_deploy.sh
View File

@@ -557,6 +557,7 @@ deb_packages() {
-e ffmpeg \ -e ffmpeg \
-e uuid-runtime\ -e uuid-runtime\
-e ssh\ -e ssh\
-e libffi-dev\
-e haproxy\ -e haproxy\
| xargs apt-get install -y | log | xargs apt-get install -y | log