diff --git a/defaults.inc b/defaults.inc
index 253c9b9c..d6a88611 100755
--- a/defaults.inc
+++ b/defaults.inc
@@ -1,5 +1,5 @@
 
-VERS='2.3.170-11052023'
+VERS='2.3.180-11052023'
 
 noheader=' update service dailytemp '
 
diff --git a/offsite-power-check.sh b/offsite-power-check.sh
index 5a969530..82bb8b6b 100755
--- a/offsite-power-check.sh
+++ b/offsite-power-check.sh
@@ -43,33 +43,36 @@ START(){
 	
 			if [ ${OFFSITE_VOLTIN%.*} -gt 105 ]; then
 				if [ -f ${PW_TMPFOLDER}/power.offsite.ac.low ]; then
-					echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_VOLTIN}'Volts - Offsite Back to Normal Voltage" >> ${PW_LOGPOWER}
-					echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_VOLTIN}'Volts - OFFSITE POWER NOMINAL AGAIN" >> ${PW_LOGFILE}
-					SENDNOTICE2 "OFFSITE POWER NOMINAL AGAIN" "Normal voltage detected
-VOLTAGE: ${OFFSITE_VOLTIN}'Volts"
+					if [ -f ${PW_TMPFOLDER}/power.offsite.off ]; then
+						echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_VOLTIN}'Volts - ${OFFSITE_BATT_CAP}% Battery - Offsite Power Restored" >> ${PW_LOGPOWER}
+						SENDNOTICE2 "OFFSITE POWER" "Power restored! Will wait 5mins before turning host(s) back on.
+BATTERY: ${OFFSITE_BATT_CAP}'(percent)
+VOLTAGE: ${OFFSITE_VOLTIN}'Volts"	
+					fi
+					
 					rm -f ${PW_TMPFOLDER}/power.offsite.ac.*
 				fi
 				if [ -f ${PW_TMPFOLDER}/power.offsite.off ]; then
 					if [ ! -f ${PW_TMPFOLDER}/power.offsite.restored ]; then
 						touch ${PW_TMPFOLDER}/power.offsite.restored
 
-					elif [ $(expr `date +%s` - $(stat -f %m ${PW_TMPFOLDER}/power.offsite.restored)) -gt 30 ]; then
-						echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_BATT_CAP}% Battery - Powering Hosts Back on After Power Outage!" >> ${PW_LOGFILE}
-						SENDNOTICE2 "OFFSITE HOST POWER" "Powering offsite host(s) back on after power was restored"
-						ipmitool -I lanplus -H 10.2.1.21 -U ${PW_ESXI_USER} -P "${PW_ESXI_PASS}" chassis power on
+					elif [ $(expr `date +%s` - $(stat -f %m ${PW_TMPFOLDER}/power.offsite.restored)) -gt 300 ]; then
+						echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_BATT_CAP}% Battery - Powering Hosts ON After Power Outage" >> ${PW_LOGFILE}
+						SENDNOTICE2 "OFFSITE HOST POWER" "Powering offsite host(s) back on after power outage"
+						ipmitool -I lanplus -H 10.2.1.21 -U ${PW_ESXI_USER} -P "${PW_ESXI_PASS}" chassis power on &
 						rm -f ${PW_TMPFOLDER}/power.offsite.*
 					fi
 				fi
 				[ $(expr `date +%s` - $(stat -f %m ${PW_LOGPOWER})) -gt 300 ] && echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_VOLTIN}'Volts - ${OFFSITE_BATT_CAP}% Batt - Normal" >> ${PW_LOGPOWER}
 			else
 				if [ ! -f ${PW_TMPFOLDER}/power.offsite.ac.low ] || [ $(expr `date +%s` - $(stat -f %m ${PW_TMPFOLDER}/power.offsite.ac.low)) -gt 240 ]; then
-					SENDNOTICE2 "OFFSITE POWER ALERT - POWER OFF/LOW!!" "Power off or low voltage detected
+					SENDNOTICE2 "OFFSITE POWER - POWER OFF/LOW!!" "Power off or low voltage detected
 BATT CAPACITY: ${OFFSITE_BATT_CAP}'(percent)
 BATT RUNTIME: ${OFFSITE_BATT_RUNTIME}'Mins" 1
 					touch ${PW_TMPFOLDER}/power.offsite.ac.low
 				fi
 
-				if [ ${OFFSITE_BATT_CAP%.*} -lt 99 ] && [ ! -f ${PW_TMPFOLDER}/power.offsite.off ]; then
+				if [ ${OFFSITE_BATT_CAP%.*} -lt 70 ] && [ ! -f ${PW_TMPFOLDER}/power.offsite.off ]; then
 					echo "($(date +'%Y-%m-%d %H:%M:%S')) - ${OFFSITE_BATT_CAP}% Battery - Powering Down Hosts!" >> ${PW_LOGFILE}
 					SENDNOTICE2 "OFFSITE HOST POWER" "Powering DOWN offsite host(s) due to power outage" 1
 					touch ${PW_TMPFOLDER}/power.offsite.off