#!/usr/bin/env bash
# powerwall - CLI commands to control VM guest power

action="$1"
FOLDER='/opt/idssys/powerwall'

source $FOLDER/defaults.inc
source $FOLDER/powerwall.conf
source /opt/idssys/defaults/colors.inc
source /opt/idssys/defaults/default.inc

shopt -s lastpipe

VERBOSE=true


#ssh root@10.5.10.35 '/vmfs/volumes/NFS_ESXi-Vault/esxi-shutdown.sh > /dev/null 2>&1' & > /dev/null 2>&1

CHECKTEMP(){
	mqtt_message=`${mqtt_conn} -t tele/${1}/SENSOR -C 1`
	echo $mqtt_message | cut -d':' -f 6 | cut -d',' -f 1 | read temp_c
	if [ "$temp_c" != "null" ] && [ "$temp_c" != "" ]; then
		temp_f=`echo "scale=2; $temp_c*1.8 + 32" | bc`
		#echo "$temp_c -> $temp_f"
		
		echo ${TEMP_THRESHOLDS[${1}]} | cut -d',' -f 1 | read temp_warn
		echo ${TEMP_THRESHOLDS[${1}]} | cut -d',' -f 2 | read temp_crit
		
		if [ $(bc -l <<< "$temp_f >= $temp_warn") -eq 1 ] && [ $(bc -l <<< "$temp_f < $temp_crit") -eq 1 ]; then
			echo "WARNING: $temp_f°F"
		elif [ $(bc -l <<< "$temp_f >= $temp_crit") -eq 1 ]; then
			echo "CRITICAL: $temp_f°F"
		else
			echo "normal: $temp_f°F"
		fi
	fi
}

CHECKTEMP_SERVICE(){
	last_temp=0
	mqtt_message=`${mqtt_conn} -t tele/${1}/SENSOR -C 1`
	while true
	do
	    ${mqtt_conn} -t tele/${1}/SENSOR | while read -r mqtt_message
	    do
			echo $mqtt_message | cut -d':' -f 7 | cut -d',' -f 1 | read temp_h
			echo $mqtt_message | cut -d':' -f 6 | cut -d',' -f 1 | read temp_c
			echo $mqtt_message | cut -d'T' -f 2 | cut -d"\"" -f 3 | read temp_d
			echo $mqtt_message | cut -d'T' -f 3 | cut -d"\"" -f 1 | read temp_t
			datetime="${temp_d} ${temp_t}"
			datetime=$(TZ=UTC0 date -d "${datetime}" +%s)
			datetime=`date -d @${datetime} +'%Y-%m-%d %H:%M:%S'`
			
			if [ "$temp_c" != "null" ] && [ "$temp_c" != "" ]; then
				temp_f=`echo "scale=2; $temp_c*1.8 + 32" | bc`
				
				#echo "$temp_c -> $temp_f"
		
				echo ${TEMP_THRESHOLDS[${1}]} | cut -d',' -f 1 | read temp_warn
				echo ${TEMP_THRESHOLDS[${1}]} | cut -d',' -f 2 | read temp_crit
				echo ${TEMP_THRESHOLDS[${1}]} | cut -d',' -f 3 | read temp_crit_sys
				
				temp_diff=$((${last_temp%.*} - ${temp_f%.*}))
				[ $temp_diff -lt 0 ] && temp_diff=$(($temp_diff * -1))
						
				if [ $(bc -l <<< "$temp_f >= $temp_warn") -eq 1 ] && [ $(bc -l <<< "$temp_f < $temp_crit") -eq 1 ]; then
					if [ $temp_diff -gt 1 ] || [ "$last_temp" = "1" ]; then
						echo "($datetime) WARNING TEMP: ${temp_f}°F - (Difference of ${temp_diff}°)" | mail -s "${1} TEMP WARNING" $email_alert
						[ $VERBOSE = true ] && echo "($datetime) alert sent"
						last_temp=$temp_f
					fi
					[ $VERBOSE = true ] && echo "($datetime) WARNING: ${temp_f}°F - (Difference of ${temp_diff}°)"
					
				elif [ $(bc -l <<< "$temp_f >= $temp_crit") -eq 1 ] && [ $(bc -l <<< "$temp_f < $temp_crit_sys") -eq 1 ]; then
					[ $VERBOSE = true ] && echo "($datetime) CRITICAL: ${temp_f}°F - (Difference of ${temp_diff}°)"
					if [ $temp_diff -gt 1 ] || [ "$last_temp" = "1" ]; then
						echo -e "($datetime) CRITICAL TEMP: ${temp_f}°F - (Difference of ${temp_diff}°)\nShutting down servers!!" | mail -s "${1} TEMP CRITICAL" $email_alert
						[ $VERBOSE = true ] && echo "($datetime) alert sent"
						last_temp=$temp_f
						SHUTDOWN_SERVERS MAIN
						echo -e "($datetime) Main servers have been shutdown" | mail -s "SERVERS SHUTDOWN" $email_alert

					fi
				elif [ $(bc -l <<< "$temp_f >= $temp_crit_sys") -eq 1 ]; then
					echo "($datetime) SYSTEM CRITICAL: ${temp_f}°F - (Difference of ${temp_diff}°)"
					if [ $temp_diff -gt 1 ] || [ "$last_temp" = "1" ]; then
						echo -e "($datetime) SYSTEM CRITICAL TEMP: ${temp_f}°F - (Difference of ${temp_diff}°)\nShutting down system servers!!" | mail -s "${1} TEMP CRITICAL" $email_alert
						[ $VERBOSE = true ] && echo "($datetime) alert sent"
						last_temp=$temp_f
						SHUTDOWN_SERVERS SYS
						echo -e "($datetime) System servers have been shutdown\nAll servers are now offline" | mail -s "SERVERS SHUTDOWN" $email_alert
					fi
				else
					if [ $last_temp -gt 1 ]; then
						echo -e "($datetime) NORMAL TEMP: ${temp_f}°F\nPrevious Temp: ${last_temp}°F" | mail -s "${1} BACK TO NORMAL" $email_alert
						[ $VERBOSE = true ] && echo "($datetime) alert sent"
					elif [ $last_temp -eq 0 ]; then
						echo -e "($datetime) Service Startup\n NORMAL TEMP: ${temp_f}°F" | mail -s "${1} TEMP NORMAL" $email_alert;
					fi
					last_temp=1
					[ $VERBOSE = true ] && echo "($datetime) normal: ${temp_f}°F"
				fi
				
				QRY="USE servermonitor; INSERT INTO sensor_data (\`sensorid\`, \`date\`, \`temp\`, \`hum\`) VALUES ('${SENSOR_ID[$1]}','${datetime}','${temp_f}','${temp_h}')"
				${mysql_conn} -e "${QRY}"
			else
				echo "($datetime) ERROR reading temperature" | mail -s "${1} ERROR" $email_alert
				[ $VERBOSE = true ] && echo "($datetime) alert sent"
			fi
	    done
	    sleep 10
	done # & 
}

CHECKACV_SERVICE(){
	voltstatus=0
	battstatus=0
	while true
	do
		INPUTACV=$(curl -s "http://10.10.0.61/stats.json" | jq '.inputs .inV')
		datetime=`date +'%Y-%m-%d %H:%M:%S'`
		if [ ${INPUTACV} -ge ${min_acvolt} ]; then
			if [ $voltstatus -eq 3 ]; then
				[ $VERBOSE = true ] && echo "($datetime) back to normal voltage: ${INPUTACV}V"
				echo -e "($datetime) Normal voltage detected\nVOLTAGE: ${INPUTACV}V" | mail -s "POWER NOMINAL AGAIN" $email_alert
				[ $VERBOSE = true ] && echo "($datetime) alert sent"
				battstatus=0
			else
				[ $VERBOSE = true ] && echo "($datetime) normal voltage: ${INPUTACV}V"
				if [ $voltstatus -eq 0 ]; then
					echo -e "($datetime) Service Startup\nNormal voltage detected\nVOLTAGE: ${INPUTACV}V" | mail -s "Power Nominal" $email_alert
					[ $VERBOSE = true ] && echo "($datetime) alert sent"
				fi
			fi
			voltstatus=1
		else
			[ $VERBOSE = true ] && echo "($datetime) LOW voltage: ${INPUTACV}V"
			if [ $voltstatus -lt 3 ]; then
				echo -e "($datetime) Power off or low voltage detected\nVOLTAGE: ${INPUTACV}V" | mail -s "POWER ALERT - LOW POWER!!" $email_alert
				[ $VERBOSE = true ] && echo "($datetime) alert sent"
				last_battvolt=$BATTVOLT
			fi
			voltstatus=3
			BATTVOLT=$(curl -s "http://10.10.0.61/stats.json" | jq '.inputs .battV')
			if [ ${BATTVOLT%.*} -lt ${min_battvolt} ] && [ ${BATTVOLT%.*} -gt ${min_battvolt_sys} ]; then
				[ $VERBOSE = true ] && echo "($datetime) LOW BATTERY voltage: ${BATTVOLT}V"
				if [ $battstatus -lt 2 ]; then
					[ $VERBOSE = true ] && echo "($datetime) Shutting down main servers..."
					echo -e "($datetime) Battery Voltage LOW: ${BATTVOLT}V\nShutting down main servers" | mail -s "BATT-VOLT LOW: SHUTDOWN SERVERS" $email_alert
					SHUTDOWN_SERVERS MAIN
					battstatus=2
				fi
				
			elif [ ${BATTVOLT%.*} -le ${min_battvolt_sys} ]; then
				[ $VERBOSE = true ] && echo "($datetime) SYSTEM LOW BATTERY voltage: ${BATTVOLT}V"
				if [ $battstatus -lt 3 ]; then
					[ $VERBOSE = true ] && echo "($datetime) Shutting down all remaining servers..."
					echo -e "($datetime) Battery Voltage REALLY LOW: ${BATTVOLT}V\nShutting down all servers" | mail -s "BATT-VOLT REALLY LOW: SHUTDOWN SERVERS" $email_alert
					SHUTDOWN_SERVERS SYS
					curl --data "cmd=PWRoff" http://10.10.0.61/cmd
					
					battstatus=3
				fi
				
			else
				[ $VERBOSE = true ] && echo "($datetime) Battery Voltage: ${BATTVOLT}V"
				
				battstatus=1
				
			fi
			volt_diff=$((${last_battvolt%.*} - ${BATTVOLT%.*}))
			[ $volt_diff -lt 0 ] && temp_diff=$(($volt_diff * -1))
			if [ $volt_diff -gt 0 ]; then
				echo -e "($datetime) Battery Voltage: ${BATTVOLT}V" | mail -s "BATTERY VOLTAGE CHANGE" $email_alert
				last_battvolt=$BATTVOLT
			fi
		fi
		
	    sleep 10
	done # & 
}

POWERLOGGER_SERVICE(){
	while true
	do
		datetime=`date +'%Y-%m-%d %H:%M:%S'`
		outV=$(curl -s "http://10.10.0.61/stats.json" | jq '.outputs .outV')
		outA=$(curl -s "http://10.10.0.61/stats.json" | jq '.outputs .outA')
		inV=$(curl -s "http://10.10.0.61/stats.json" | jq '.inputs .inV')
		inA=$(curl -s "http://10.10.0.61/stats.json" | jq '.inputs .inA')
		battV=$(curl -s "http://10.10.0.61/stats.json" | jq '.inputs .battV')
		battA=$(curl -s "http://10.10.0.61/stats.json" | jq '.inputs .xfA')
		
		QRY="USE servermonitor; INSERT INTO power_data (\`sensorid\`, \`date\`, \`volt\`, \`amp\`) VALUES ('2','${datetime}','${inV}','${inA}')"
		${mysql_conn} -e "${QRY}"
		QRY="USE servermonitor; INSERT INTO power_data (\`sensorid\`, \`date\`, \`volt\`, \`amp\`) VALUES ('3','${datetime}','${outV}','${outA}')"
		${mysql_conn} -e "${QRY}"
		QRY="USE servermonitor; INSERT INTO power_data (\`sensorid\`, \`date\`, \`volt\`, \`amp\`) VALUES ('4','${datetime}','${battV}','${battA}')"
		${mysql_conn} -e "${QRY}"
		
		sleep function 1m {
			gfds
		}d
		
	done
}

UPDATE_SERVICES(){
	for srvc in "${POWERWALL_SERVICES[@]}"; do
		/bin/systemctl stop $srvc
	done
	sleep 5s
	for srvc in "${POWERWALL_SERVICES[@]}"; do
		echo 
		/bin/systemctl start $srvc
	done
}

STOP_SERVICE(){
	service_pid=`systemctl show --property MainPID --value ${POWERWALL_SERVICES[${1}]}`
	/usr/bin/pkill -P $service_pid
}

SHUTDOWN_SERVERS(){
	touch $FOLDER/shutdown
	
	HOSTS=${1}HOSTS[@]	
	for ESXIHOST in "${!HOSTS}"; do
		echo "Shutting Down: ${ESXIHOST}"
		/usr/bin/ssh root@${ESXIHOST} "cp /vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/async.sh /vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/async-${ESXIHOST}.sh"
		/usr/bin/ssh root@${ESXIHOST} "cp /vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/esxidown.sh /vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/esxidown-${ESXIHOST}.sh"
		/usr/bin/ssh root@${ESXIHOST} "sed -i 's/\$SCRIPTPATH\/esxidown.sh/\$SCRIPTPATH\/esxidown-${ESXIHOST}.sh/g' /vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/async-${ESXIHOST}.sh"
		/usr/bin/ssh root@${ESXIHOST} "/vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/async-${ESXIHOST}.sh"
	done
	for ESXIHOST in "${!HOSTS}"; do
		echo -en "Waiting for Host (${ESXIHOST}) to shutdown... "
	    while ping -qw 10 -c3 "${ESXIHOST}">/dev/null 2>&1; do
	    	sleep 1
	    done
		echo "Ok"
	done
	
	if [ "${1}" = "MAIN" ]; then
		/usr/bin/ssh root@10.10.2.10 "/vmfs/volumes/iSCSI2-Datastore2\ \(R5\)\(1-4\)/\!SCRIPTS/esxidown/async-${ESXIHOST}.sh"
		echo -en "Waiting for iSCSI-Server to shutdown... "
	    while ping -qw 10 -c3 "${ESXIHOST}">/dev/null 2>&1; do
	    	sleep 1
	    done
		echo "Ok"
	fi
}





if [ ${action-x} ]; then
	case $action in
		updateservices) UPDATE_SERVICES;;
		checktemp) CHECKTEMP ${2};;
		checktemp_service) 
			if [ "${2}" = "stop" ]; then
				STOP_SERVICE ${3}
			else
				CHECKTEMP_SERVICE ${3}
			fi
		;;
		checkacv_service) 
			if [ "${2}" = "stop" ]; then
				STOP_SERVICE ACV
			else
				CHECKACV_SERVICE
			fi
		;;
		powerlogger_service) 
			if [ "${2}" = "stop" ]; then
				STOP_SERVICE powerloger
			else
				POWERLOGGER_SERVICE
			fi
		;;
	esac
fi

exit 0