Update 'install-nodemgmt.sh'

filewatcher.sh

@@ -27,12 +27,12 @@ echo "Monitoring file $1 for changes - sending alerts to $2"
 while inotifywait -e modify -e attrib -e move -e delete $1 -o /opt/filewatcher/audit.log; do
         sleep 1
 
-        # changes="$(tail -n5 $1)"
+        changes="$(tail -1 $1)"
 
-        changes="$(cat /opt/filewatcher/audit.log)"
-                echo "The following change occurred in the file $1 : $changes" | mail -s "Change in $1" $2
-                rm /opt/filewatcher/audit.log
-                touch /opt/filewatcher/audit.log
+        #changes="$(cat /opt/filewatcher/audit.log)"
+        echo "The following change occurred in the file $1 : $changes" | mail -s "Change in $1" $2
+        rm /opt/filewatcher/audit.log
+        touch /opt/filewatcher/audit.log
         done
 else
         echo "Error: File $1 not found"

install-esxipower.sh

@@ -0,0 +1,37 @@
+#!/usr/bin/env bash
+# Wrapper script for install, for easier execution via URL.
+
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/branch/master/colors.inc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/branch/master/default.inc)"
+
+
+if [ "$EUID" -ne 0 ]; then APTFUNC="sudo ${ATYPE}"
+else APTFUNC="${ATYPE}"
+fi
+echo ""
+echo -e "${idsCL[LightGreen]}ESXi-Power Installation Script${idsCL[Default]}"
+
+do_with_root $APTFUNC -y install wget curl git
+
+do_with_root set -eu
+do_with_root git clone https://git.schroedercity.com/voltron/esxi-power.git /opt/idssys/esxi-power
+do_with_root ln -s /opt/idssys/esxi-power/run.sh /usr/local/bin/esxipower
+
+if [ ! -d "/opt/idssys/defaults" ]; then
+	do_with_root set -eu
+	do_with_root git clone https://git.schroedercity.com/voltron/iDS-Defaults.git /opt/idssys/defaults
+fi
+
+if [ ! -d "/opt/idssys/settings" ]; then
+	do_with_root mkdir /opt/idssys/settings
+fi
+echo -e "" > /opt/idssys/settings/esxi-power.conf
+
+echo ""
+echo -e "${idsCL[Yellow]}ESXi-Power has been Installed${idsCL[Default]}"
+echo ""
+echo -e "To run ESXi-Power, use the command: ${idsCL[Green]}esxipower${idsCL[Default]}"
+echo ""
+echo ""
+
+exit 0

install-filewatcher.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
-source /dev/stdin <<< "$(curl -sL http://scity.xyz/colorsinc)"
-source /dev/stdin <<< "$(curl -sL http://scity.xyz/defaultinc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/iDS-Defaults/raw/branch/master/colors.inc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/iDS-Defaults/raw/branch/master/default.inc)"
 	
 if type apt &>/dev/null; then
 	ATYPE="apt"

install-linupx.sh

@@ -1,8 +1,8 @@
 #!/usr/bin/env bash
 # Wrapper script for install, for easier execution via URL.
 
-source /dev/stdin <<< "$(curl -sL http://scity.xyz/colorsinc)"
-source /dev/stdin <<< "$(curl -sL http://scity.xyz/defaultinc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/branch/master/colors.inc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/branch/master/default.inc)"
 
 
 if [ "$EUID" -ne 0 ]; then APTFUNC="sudo ${ATYPE}"

install-nodemgmt.sh

@@ -1,8 +1,8 @@
 #!/usr/bin/env bash
 # Wrapper script for install, for easier execution via URL.
 
-source /dev/stdin <<< "$(curl -sL http://scity.xyz/colorsinc)"
-source /dev/stdin <<< "$(curl -sL http://scity.xyz/defaultinc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/branch/master/colors.inc)"
+source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/branch/master/default.inc)"
 
 
 echo ""

install-unifi-poller

@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+# Wrapper script for install, for easier execution via URL.
+
+source /dev/stdin <<< "$(curl -sL http://scity.xyz/colorsinc)"
+source /dev/stdin <<< "$(curl -sL http://scity.xyz/defaultinc)"
+
+
+if [ "$EUID" -ne 0 ]; then APTFUNC="sudo ${ATYPE}"
+else APTFUNC="${ATYPE}"
+fi
+echo ""
+echo -e "${idsCL[LightGreen]}UniFi-Poller Setup Script${idsCL[Default]}"
+
+sudo echo "deb https://repos.influxdata.com/ubuntu bionic stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+sudo curl -sL https://repos.influxdata.com/influxdb.key | sudo apt-key add -
+sudo apt -y update
+sudo apt install -y influxdb
+sudo systemctl start influxdb
+
+influx -host localhost -port 8086  -execute "CREATE DATABASE unifi"
+influx -host localhost -port 8086  -execute "CREATE USER unifipoller WITH PASSWORD 'unifipoller' WITH ALL PRIVILEGES"
+influx -host localhost -port 8086  -execute "GRANT ALL ON unifi TO unifipoller"
+
+curl -s https://golift.io/gpgkey | sudo apt-key add -
+sudo echo deb https://dl.bintray.com/golift/ubuntu bionic main | sudo tee /etc/apt/sources.list.d/unifi-pollers.list
+sudo apt update
+sudo apt install unifi-poller
+
+
+echo ""
+echo -e "${idsCL[Yellow]}UniFi-Poller has been Installed${idsCL[Default]}"
+echo ""
+echo ""
+
+exit 0

list-colors.sh

@@ -1,7 +1,8 @@
 #!/usr/bin/env bash
 
 clear
-source /dev/stdin <<< "$(curl -sL https://git.schroedercity.com/voltron/Misc-Scripts/raw/master/colors.inc)"
+source /dev/stdin <<< "$(curl -sL http://scity.xyz/colorsinc)"
+#source /dev/stdin <<< "$(curl -sL http://scity.xyz/defaultinc)"
 
 echo ""
 echo "--------------------------"

vcenter-ssl-update.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Wrapper script for install, for easier execution via URL.
+
+source /dev/stdin <<< "$(curl -sL http://scity.xyz/colorsinc)"
+source /dev/stdin <<< "$(curl -sL http://scity.xyz/defaultinc)"
+
+
+if [ "$EUID" -ne 0 ]; then APTFUNC="sudo ${ATYPE}"
+else APTFUNC="${ATYPE}"
+fi
+echo ""
+echo -e "${idsCL[LightGreen]}vCenter SSL Update Script${idsCL[Default]}"
+
+/usr/lib/vmware-vmca/bin/certificate-managers
+
+
+exit 0