49 lines
1.7 KiB
Markdown
49 lines
1.7 KiB
Markdown
# octoprint_deploy
|
|
These files provide a simple bash script for quickly deploying multiple octoprint instances on a single computer (Ubuntu/debian based systems).
|
|
|
|
# How to use
|
|
Install Ubuntu on computer of interest.
|
|
Install Octoprint. You can follow the directions here: https://octoprint.org/download/
|
|
or here: https://community.octoprint.org/t/setting-up-octoprint-on-a-raspberry-pi-running-raspbian/2337
|
|
|
|
Start up Octoprint for the first time to setup a base instance profile. The base profile will be edited in several places to allow specific modifications during deployment.
|
|
|
|
[PLACE HOLDERS FOR EDITING STUFF]
|
|
Make sure whichever printer you are installing for is not plugged in via USB
|
|
|
|
Go to wherever you downloaded octoprint_deploy: cd octoprint_deploy
|
|
Run the bash script: $ sudo ./addnew_printer.sh
|
|
And follow the instructions. Defaults are shown in brackets:
|
|
|
|
>UNPLUG PRINTER FROM USB
|
|
>Enter the name for new printer/instance:
|
|
>*printer01*
|
|
|
|
>Port on which this instance will run (ENTER will increment last value in /etc/octoprint_ports):
|
|
|
|
>Selected port is: 5000
|
|
|
|
>Octoprint Daemon User [paul]:
|
|
|
|
|
|
>Octoprint Daemon Path [/home/paul/OctoPrint/venv/bin/octoprint]:
|
|
|
|
|
|
>Octoprint Config Path [/home/paul/]:
|
|
|
|
>Auto-detect printer serial number for udev entry?*y*
|
|
|
|
>Plug your printer in via USB now (detection time-out in 2 min)
|
|
|
|
>Serial number detected as: AL03M8MG
|
|
|
|
>Octoprint instance template base folder [/home/paul/.octoprint]:
|
|
|
|
>Do you want to proceed? *y*
|
|
|
|
This will do the following:
|
|
|
|
1. Copy everything in ~/.octoprint to ~/.printer01 with modifications
|
|
2. Update udev rules so this printer will always be at port /dev/octo_printer01
|
|
3. Create, start, and enable the service printer01 to control that octoprint instance.
|